%
%  T A B L S . S T Y           (ver 3.4a)
%
%  Copyright (c) 1989-1995  by Donald Arseneau
%  from
%  LaTeX, Copyright (c) 1985... by Leslie Lamport
%
%  Modify LaTeX's array and tabular environments to keep text from touching
%  other text or hlines above or below.  See instructions after \endinput.
%
%----------------------------------------------------------------------

%  create registers and default settings:

\newdimen\tablinesep   \tablinesep= 1pt    \let\tablineskip=\tablinesep
\newdimen\arraylinesep \arraylinesep= 1pt  \let\arraylineskip=\arraylinesep
\newdimen\extrarulesep \extrarulesep= 3pt

\newdimen\@arstdepth \newdimen\@arstheight \newdimen\@skip@bove

\let\@tarlinesep\z@ % so outermost arrays will not act nested

% Change the initializations to create a smaller strut and include
% my macros in the initialization for the preamble.

\def\@array[#1]#2{%  remember global variables to allow recursion:
 \edef\@unrecurse{\global\@skip@bove\the\@skip@bove
     \global\@arstheight\the\@arstheight\global\@arstdepth\the\@arstdepth}%
%  Make the strut on the first line be shorter by the linesep outside
 \let\@otarlinesep\@tarlinesep \global\@skip@bove-\@otarlinesep
%  This setup works for both tabular and array because of this test:
 \ifx\@classz\@arrayclassz \let\@tarlinesep\arraylinesep
 \else \let\@tarlinesep\tablinesep \fi
 \divide\@tarlinesep\tw@% half sep is applied to height & depth
 \let\@seesize\relax \let\@rememsize\relax \@mkpream{#2}%
 \@tempdima\arraystretch\ht\strutbox \@tempdimb\arraystretch\dp\strutbox
 \ifdim\@tarlinesep>\z@
   \def\@rememsize{\protect\@r@m@msize}\let\@seesize\@s@@size
   \advance\@tempdima-\@tarlinesep \advance\@tempdimb-\@tarlinesep
 \fi \setbox\@arstrutbox\hbox{% set up smaller strut
    \vrule \@height\@tempdima \@depth\@tempdimb \@width\z@}%
 \edef\@preamble{\ialign \noexpand\@halignto \bgroup
 \unhcopy\@arstrutbox \@preamble \tabskip\z@skip &\@sharp \cr}%
% I have added an extra column (&\@sharp) to take the smart strut.
 \let\@startpbox\@@startpbox \let\@endpbox\@@endpbox
 \if#1t\vtop \else \if#1b\vbox \else \vcenter \fi\fi
 \bgroup \let\par\@empty
 \global\@arstheight\ht\@arstrutbox \global\@arstdepth\dp\@arstrutbox
 \advance\extrarulesep.5\arrayrulewidth
 \let\@sharp##\let\protect\relax \lineskip\z@skip \baselineskip\z@skip
 \@preamble}

%  Change the meaning of \\ to do the final strut calculation and
%  put in the smart strut

\def\@xtabularcr{\@ifnextchar[{\@argtabularcr}{\@argtabularcr[\z@]}}

\def\@xarraycr{\aftergroup\@argarraycr\@xtabularcr}

\def\@argarraycr{${}}% put this "aftergroup" so we can combine macro streams

% Sense a following \end, and adjust spacing accordingly;
% Sense a rule below, as signalled by "\noalign" after expansion

\def\@argtabularcr[#1]{%
  \@ifnextchar\end{\global\advance\@arstdepth-\@otarlinesep\@mystrutcr{#1}}%
    {\def\@xargarraycr{\@ifnextchar\noalign
      {\global\advance\@arstdepth\extrarulesep \@mystrutcr{#1}}%
      {\@mystrutcr{#1}}%
    }\expandafter\expandafter\expandafter\@xargarraycr}}

\def\@mystrutcr#1{\ifnum\z@=`{\fi}&\omit % end group, new column
  \advance\@arstheight\@skip@bove
  \ifdim#1>\z@ \advance\@arstdepth#1\fi 
  \advance\@arstheight\@tarlinesep \advance\@arstdepth\@tarlinesep
  \vrule \@height\@arstheight \@depth\@arstdepth \@width\z@
  \global\@arstheight\ht\@arstrutbox \global\@arstdepth\dp\@arstrutbox
  \global\@skip@bove\z@ \cr
  \ifdim#1<\z@ \noalign{\vskip#1}\fi}

% Simulate \crcr at the end of the table, assuming that we are not in
% vmode once a line of entries has started.  This fails to put in a smart
% strut if the table ends without \\ while in vmode in a column entry.
% Use \@unrecurse to simulate grouping of global parameters.
% For nested tables and arrays, the final strut is reduced by the linesep
% that will be added at the outer level.

\def\endtabular{\endarray $\egroup}

\expandafter\let\csname endtabular*\endcsname=\endtabular

\def\endarray{\ifvmode\csname crcr\endcsname % just do \crcr if \\ given
  \else {\ifnum\z@=`}\fi \global\advance\@arstdepth-\@otarlinesep
   \@mystrutcr{\z@}% else, simulate \\
  \fi\egroup\@unrecurse\egroup}

% Put \@seesize...\@rememsize in all preamble templates

\def\@tabclassz{\ifcase \@lastchclass \@acolampacol \or \@ampacol \or
   \or \or \@addamp \or
   \@acolampacol \or \@firstampfalse \@acol \fi
\edef\@preamble{\@preamble{%
  \ifcase
     \@chnum \hfil\@seesize\ignorespaces\@sharp\unskip\@rememsize \hfil
     \or \@seesize\ignorespaces\@sharp\unskip\@rememsize \hfil
     \or \hfil\hskip\z@skip\@seesize\ignorespaces\@sharp\unskip\@rememsize
  \fi}}}

\def\@arrayclassz{\ifcase \@lastchclass \@acolampacol \or \@ampacol \or
   \or \or \@addamp \or
   \@acolampacol \or \@firstampfalse \@acol \fi
\edef\@preamble{\@preamble
  \ifcase \@chnum
     \hfil\@seesize $\relax\@sharp$\@rememsize \hfil
      \or \@seesize $\relax\@sharp$\@rememsize \hfil
      \or \hfil\@seesize $\relax\@sharp$\@rememsize \fi}}

\def\@classv{\@addtopreamble{\@seesize\@startpbox{\@nextchar}%
  \ignorespaces\@sharp\@endpbox\@rememsize}}

% my macros to keep track of the size of entries.

\def\@s@@size{\setbox\z@\hbox\bgroup\bgroup}

\def\@r@m@msize{\egroup\egroup % end the \hbox
    \ifdim\ht\z@>\@arstheight \global\@arstheight\ht\z@ \fi
    \ifdim\dp\z@>\@arstdepth  \global\@arstdepth \dp\z@ \fi
    \unhbox\z@}

% Redefine \hline to remove notches and to give extrarulesep and
% optional [] skip

\def\hline{\noalign{\ifnum\z@=`}\fi\kern-.5\arrayrulewidth
   \hrule \@height \arrayrulewidth \kern-.5\arrayrulewidth
   \global\@skip@bove\extrarulesep
   \@ifnextchar[\@yhline{\expandafter\expandafter\expandafter\@zhline}}

\def\@xhline{\ifx\@tempa\noalign \vskip\doublerulesep \fi % may be the opt.
  \ifnum`{=\z@\fi}}

\def\@yhline[#1]{\doublerulesep#1\global\advance\@skip@bove#1\relax
  \expandafter\expandafter\expandafter\@zhline}

\def\@zhline{\futurelet\@tempa\@xhline}%

% make \cline give the \extrarulesep below

\let\TB@cline\cline

\def\cline#1{\noalign{\global\@skip@bove\extrarulesep}\TB@cline{#1}}

\endinput
% -----------------------------------------------------------------
%
%  Modify LaTeX's array and tabular environments to keep text from touching
%  other text or hlines above or below.  There are three new parameters:
%
%  \tablinesep (or \tablelineskip): minimum space between text on successive
%                  lines in a tabular environment.  Negative distances are
%                  treated as zero.  The default value is 1pt.  0pt turns off
%                  checking for touching text.  Text given in an @{ }
%                  specification is never checked for overlap.
%
%  \arraylinesep (or \arraylineskip): like \tablinesep, but for arrays.
%
%  \extrarulesep : extra space to add above and below each \hline and \cline.
%                  There will be at least \extrarulesep + 0.5\tablinesep
%                  between an \hline and a line of text.  Negative values can
%                  be used, but only until some text touches the line.
%                  The default value is 3pt.
%
%  To limit interline separations in tables but not arrays, declare
%        \setlength\arraylinesep{0pt}
%  The appearance of normal LaTeX tables can be had with
%        \setlength\tablinesep{0pt}
%        \setlength\arraylinesep{0pt}
%        \setlength\extrarulesep{0pt}
%  but it would be better to not use tabls in this situation.
%
%  \hline[dimen]:
%
%  \hline has been changed to take an optional length argument just like \\
%  giving the space to insert below.  This space is in addition to the
%  \extrarulesep and linesep.  A negative value will reduce the space until
%  the hline touches some text below, and then will have no further effect.
%  E.g., \hline[-9in] draws a horizontal line while suppressing the extrarulesep
%  beneath.  Also, the new \hline FIXES THE NOTCHES that used to appear at the
%  junction between horizontal and vertical lines.
%
%  How it works:
%  There are no struts in the preamble entries (lie), rather, there are
%  tests to measure the maximum height and depth of all entries on a line.
%  The maximum values start at the size of LaTeX's \@arstrut minus the
%  appropriate linesep.  At the \\, a strut is inserted (in its own
%  column) which is that maximum size plus the linesep plus any additional
%  space for separation from \hline s.
%
%  The Downside:
%  Building a table will be slower than before because the entries have to
%  be boxed twice (by \@seesize and by \halign itself) instead of just once.
%  \setlength\tablinesep{0pt} will recover most of this speed, with
%  \extrarulesep still partially in effect--extra space will still be added
%  around hlines, but it may be taken up by very tall or very deep table
%  entries; thus text may still touch the lines.  Because of the speed penalty,
%  if your computer is slow, it is probably best to omit the TABLS option 
%  until producing a final copy.
%
%  (2.2) \endtabular* is defined (it was left out before. oops!)
%  change some \z@ to \z@skip. Thanks to Michael Downes.
%  Create alias \tablinesep = \tablelineskip for consistency with
%  \tabcolsep nomenclature. \def\\{\crcr} used in ver 2.1 didn't work right,
%  so use \csname crcr\endcsname.
%
%  (3.0) Arrays are included! The very top and bottom struts of nested
%  arrays are reduced by the lesser of the inner and outer lineseps so space
%  doesn't accumulate with each level of nesting.
%
%  (3.1 & 3.2 & 3.3) Minor changes to match LaTeX updates.
%
%  (3.4) More extensive changes, prompted by LaTeX updates.  You can now hide
%  \hline in amother macro, and it is still recognized. [Similar commands that
%  add \extrarulesep must begin with \noalign.]  \hline[3pt]\hline is now
%  reasonable. (Also try \hline[0pt]\hline!)
%
%  Send problem reports to [email protected]
%
%  Test integrity of file:
%  brackets: round, square, curly, angle:   () [] {} <>
%  backslash, slash, vertical, at, dollar, and: \ / | @ $ &
%  hat, grave, acute (apostrophe), quote, tilde:   ^ ` ' " ~