%       psboxes.sty
%
% This package enables to put a PostScript drawing behind a TeX box.
% The drawing is parametrized by the position and the size of the
% TeX box. To put a gray [rounded] box behind a word use
%       \PScommands % Once at the begining
%
%       ... text text \psboxit{25 cartouche}{THE WORD} text text
%       \psboxit{box 0.5 setgray fill}{\spbox{ANOTHER WORD}}
%       text text ...
%
%            * If your boxes are ill sized try to change 16384 to
% something else (original code used 65536).
% % 65536 is the internal unit of TeX (scaled point, TeXBook page 57)
% Those macros were adapted from Tom Sheffler (CMU)'s psframe.sty style. In
% particular, the spacebox macro was just copied from his style.
%
%       Je'ro^me MAILLOT, INRIA
%       [email protected]
%       August 1991
%
%
% A Few PostScript definitions to use with \psboxit
% Call \PScommands once at the begining of your program, this will
% define : box roundedbox rectcartouche and cartouche. They are 4
% PostScript programs. Change the values before setlinewidth end
% setgray to customize your boxes
%
%     Ex : \psboxit{25 cartouche}{blah blah}
%          \psboxit{rectcartouche}{blah blah}
%
\long\def\PScommands{\special{! TeXDict begin
/box{%                  Processes the path of a rectangle.
%                       Needs : x0 y0 x1 y1.
newpath 2 copy moveto 3 copy pop exch lineto 4 copy pop pop
lineto 4 copy exch pop exch pop lineto closepath } bind def
%
%
/min{ 2 copy  gt { exch } if pop } bind def%
/max{ 2 copy  lt { exch } if pop } bind def%
/roundedbox{%           Processes the path of a rounded rectangle.
%                       Needs : x0 y0 x1 y1 radius.
%       The bounding box is augmented by +/- radius to allow easily to
%       frame several rounded boxes around the same Texture box. Ex:
%  \psboxit{4 copy 15 roundedbox 25 roundedbox} {\spbox{Some Text}}
%       draws two scaled boxes arond the same word. Delete the `radius
%       sub' and `radius add' commands to suppress that enlargement.
%
/radius exch store
3 2 roll %              x0 x1 y1 y0
2 copy min radius sub /miny exch store 
       max radius add /maxy exch store
2 copy min radius sub /minx exch store 
       max radius add /maxx exch store
newpath
minx radius add miny moveto
maxx miny maxx maxy radius arcto
maxx maxy minx maxy radius arcto
minx maxy minx miny radius arcto
minx miny maxx miny radius arcto 16 {pop} repeat
closepath
}bind def
%
%
/rectcartouche{%        Draws a filled and framed box
%                       Needs : x0 y0 x1 y1
box gsave  .95 setgray fill grestore 1 setlinewidth stroke }bind def
%
%
/cartouche{%            Draws a filled and framed rounded box
%                       Needs : x0 y0 x1 y1 radius
roundedbox gsave .95 setgray fill grestore 1 setlinewidth stroke }bind def
%
end }%                  Closes dictionnary
}\PScommands%
%%
%% PSBOXIT
%%
%% \psboxit{PS program}{TeX stuff}
%%
%% The bounding box of the TeX stuff is pushed on the PostScript stack
%% and then the program in the first argument is called
%%
%% EXAMPLE: set some text on a gray background, Use the SPBOX macro to
%% give some space around the text.
%%
%%      \psboxit{box 0.5 setgray fill}{\spbox{Some Text}}
%%
%% See \PScommands for the \box definition
%%
\chardef \atcode = \the \catcode `\@
\catcode `\@ = 11
 
\long\def\psboxit#1#2{%
\begingroup\setbox0=\hbox{#2}%
\dimen0=\ht0 \advance\dimen0 by \dp0%
    % Write out the PS code to set the current path using HEIGHT,
    % WIDTH , DEPTH of box0.
    \hbox{%
    \special{ps: gsave currentpoint translate
        0
        \number\dp0 \space 15800 div    % hand tuned for dvips
        \number\wd0 \space 15800 div    % hand tuned for dvips
        \number\ht0 \space -15800 div   % hand tuned for dvips
%        \number\dp0 \space 16384 div
%        \number\wd0 \space 16384 div
%        \number\ht0 \space -16384 div   % Bounding box
%        \number\dp0 \space 65536 div
%        \number\wd0 \space 65536 div
%        \number\ht0 \space -65536 div   % Bounding box
        #1 grestore}%
    \copy0%
}%HBOX
\endgroup%
}%
 
% SPACEBOX
%
% This macro simply takes some TeX stuff, and puts FOUR sides on it
% so that the box is the same size as the thing you'd get with
% an \fbox{} command.  (All I did was modify the code for \fbox{}
% so that all rules were replaced with struts).
%
% USAGE: \spbox{text} is just like \fbox{text} but makes no rules
%
% REASON: so that if using \pspath{...}{\fbox{stuff}}
%         there is a way to get another box the same size:
%         \pspath{...}{\spbox{stuff}}
%
\long\def\spbox#1{\leavevmode\setbox1\hbox{#1}%
    \dimen0\fboxrule \advance\dimen0 \fboxsep%
    \advance\dimen0 \dp1%
    \hbox{\lower \dimen0\hbox%
    {\vbox{\hrule height \fboxrule width 0pt%
          \hbox{\vrule width \fboxrule height 0pt \hskip\fboxsep%
          \vbox{\vskip\fboxsep \box1\vskip\fboxsep}\hskip%
                 \fboxsep\vrule width \fboxrule height 0pt}%
                 \hrule height \fboxrule width 0pt}}}}%
 
\def\Gbox#1{\psboxit{box 0.9 setgray fill}{#1}}
%%
\newsavebox{\gray@box}%
\newdimen\gray@space
%
\long\def\Beginboxitpara#1{\edef\gray@tmp{#1}%
\gray@space=\fboxsep \advance\gray@space by -\fboxrule
\par\prevdepth=-1000pt\vskip 0.5\baselineskip\noindent
\setbox\gray@box=%
\hbox\bgroup \vrule width \fboxrule
        \vtop\bgroup \hrule
             \vbox\bgroup
                   \kern\gray@space
                   \hbox\bgroup
                        \kern\gray@space
                        \vtop\bgroup
                   \hsize=\linewidth\advance\hsize-2\fboxsep\noindent
                   \ignorespaces}
\def\Endboxitpara{%
                             \egroup
                        \kern\gray@space
                        \egroup
                   \kern\gray@space
                   \egroup \hrule
             \egroup\vrule width \fboxrule
     \egroup
     \psboxit{\gray@tmp}{\box\gray@box}%
     \vskip 0.5\baselineskip
\par}

\newenvironment{boxitpara}[1]{\Beginboxitpara{#1}}{\Endboxitpara}
\newenvironment{boxitpara*}[1]{\Beginboxitpara{#1}\hbox to\hsize{}}%
{\Endboxitpara}

\catcode `\@ = \the \atcode
\endinput