\def\fileversion{v27}
\def\filedate{1996/12/20}
% minitoc.sty
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Jean-Pierre Drucbert
% ONERA/CERT/GPI
% Office National d'\'Etudes et de Recherches A\'erospatiales
% Centre d'\'Etudes et de Recherches de Toulouse
% Groupe de Prestations Informatiques
% Complexe Scientifique de Rangueil
% 2, Avenue \'Edouard Belin
% BP 4025
% F-31055 TOULOUSE CEDEX
% FRANCE
%
% Phone +33-62-25-25-15
%
% Email: [email protected]
%
% Please send me any (constructive) suggestions and comments.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% History (contains some obsolete things... it is NOT
% the REAL documentation)
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% minitoc.sty --- redefines the \chapter command to display a
% mini-table-of-contents at the beginning of every chapter.
% Oct-90 Original version, by Nigel Ward.
% Nov-91 Revised to reuse \chapter, \section, \subsection commands
% transparently, generate toc-file-name automatically,
% assorted other cleanup. Dan Jurafsky
% Jun/Jul-93 New design, to avoid allocating a newwrite
% for each chapter (!)
% Added \chapterend to terminate the scope of a minitoc.
% (IF YOU FORGOT PUTTING \chapterend at the end
% of EACH chapter, an entry for the next chapter
% will appear in each minitoc.) (Thanks to Yufan Hu).
% Replaced ``minipage'' environnement by a ``verse''
% environnement, to allow a minitoc split across pages.
% All the layout of the minitoc is in the
% \minitableofcontents command, so if someboby wants
% to redefine that layout, he has just to
% rewrite it (and only it).
%
% You can inhibit the minitoc for the next chapter
% by preceding it with \minitocno. (\minitocyes
% is useless for the user: it is implicit AFTER
% the \chapter* pseudo-chapters).
%
% Problems: you MUST have \chapterend to terminate each
% chapter with a minitoc.
% How about avoiding this constraint?
%
% The depth of the minitoc is user-adjustable with
% the counter `minitocdepth' (as `tocdepth' for the table
% of contents).
% At least three passes (3!!!) of LaTeX are necessary to get
% correct minitoc's (the first pass creates the .mtcX files,
% the second uses them (but they may contain wrong page
% numbers) and recreates them, the third should be ok).
%
% Works with \chapter[xxx]{yyy} and floating bodies.
% Works with two columns (but the minitoc is in composed in
% one column; how to make it to spread over the two column?)
% Some mods added to work with xr.sty (external references).
% xr.sty version 5 is much more tolerant.
% 05Jul93 Version 2
% Added compatibility with hangcaption.sty (the option
% hangcaption (if present) must be given BEFORE minitoc
% option.)
% BEWARE to options modifying \@caption
% Version 3 not released (buggy)
% 09Jul93 Version 4
% Added \if@realch to avoid contentslines from
% pseudo-chapters to go into the toc!
% The option file mtcoff.sty allows to use a latex
% document with minitoc commands and to make them
% transparent: just replace the minitoc option by
% mtcoff.
% 13Jul93 Version 5
% Added a selection mechanism to not write spurious things
% in the minitoc's.
% 15Jul93 Version 6
% Fixed problems about chapters in the toc,
% removed obsolete \caption stuff (filters are better)
% added compatibility with toch.sty
% (toch.sty makes a table of chapters. If used,
% must be loaded BEFORE minitoc.sty)
% 22Jul93 Version 7 (MAJOR DIFFERENCES)
% Completely rewritten, using tricks from xr.sty
% (the version 5, by David Carlisle). The info
% for minitocs is directly stolen from the .toc
% file.
% \chapterend and \minitocno are suppressed
% \minitoc, \dominitoc and \faketableofcontents added
% 29Jul93 Version 8
% Spacing adjustements.
% 04Aug93 Version 9
% Added mods for MS-DOS (search MS-DOS, uncomment;
% search UNIX, comment out). MS-DOS allows only
% 3 characters for extensions in file names (what a pity!).
% 05Aug93 Version 10
% Works with appendices.
% Detects obsolete versions of latex.tex.
% (\@inputcheck or \reset@font not defined).
% 18Aug93 Version 11
% Added \mtcSfont, font for section entries,
% \mtcSSfont for subsection entries,
% \mtcSSSfont for subsubsection entries,
% \mtcPfont for paragraph entries,
% \mtcSPfont for subparagraph entries.
%
% 16Dec93 Version 12
% Use \kern's in place of \vspace*'s,
% and added penalties (\nopagebreak) to
% avoid a page break just before last \mtc@rule.
% Also added a \samepage environnement.
% Removed old commented out lines from
% previous versions.
%
% 17Dec93 Version 13
% Added minilof and minilot stuff.
% For MS-DOS, uncomment the definition of \SHORTEXT.
%
% 03Jan94 Version 14
% Corrected space under minitoc/lof/lot and added a
% \raggedright to avoid ``underfull'' warnings.
% Corrected some spacing problems (avoiding ~'s).
% \mtifont changed from \normalsize\bf to
% \large\bf.
% Some mods suggested by Donald Arseneau (thanks):
% \@newread becomes \newread, not outer
% version of \newread.
% \empty replaced by \relax in the spare definition
% of \reset@font.
% Removed \clubpenalty=10000 and \widowpenalty=10000
% (done by \samepage), and \noindent.
% Simplified processing of optional argument in
% \minitoc, \minilof and \minilot.
%
% 27Jan94 Version 15
% Added parttoc, partlof and partlot for books,
% with commands and parameters parallel to
% those for mini-things.
%
% Added secttoc, sectlof and sectlot for articles,
% with commands and parameters parallel to
% those for mini-things.
%
% 02Feb94 Version 16
% Bug fixes (typos).
%
% 23Jun94 Version 17
% Keyword 'n' (null) synonym of 'e' (empty).
% Compatibility with LaTeX ``2e''.
% Thanks to Denis Roegel (who found
% the problem) and Frank Mittelbach
% (who gave the hints to solve).
%
% 26Jun94 Version 18
% Make minitoc really compatible with latex2e
% Introduce the language files as options
% Thanks to Michel Goossens (via Frank Mittelbach)
% who was inspired by the code of babel (Johannes Braams).
%
% 16Aug94 Version 19
% Added stuff for numbering of chapters (parts,
% sections) not starting at 1.
% \firstchapteris etc. commands added.
% \mtcrule, \nomtcrule etc. commands added.
% Corrected a bug in \c@mti.
% Corrected mtcswedish.sty (Jan Michel Rynning)
% Corrected appendix in articles
%
% 25Aug94 Version 20
% Corrected spacing before and after minitocs
% and siblings.
% Added \mtcpagenumbers and \nomtcpagenumbers
% (and siblings) to make minitocs with/without
% page numbers. Default: page numbers.
% Corrected (difficult bug) appendix in articles.
% Corrected vertical spacing.
% Corrected a problem with chapters numbered
% with (uppercase) roman numbers.
%
% 07Sep94 Version 21
% Corrected typos in minitoc.sty and minitoc.tex.
%
% 10Oct94 Version 22
% Corrected typos in minitoc.sty.
%
% 08Nov94 Version 23
% Added a missing line in \sectlof@.
% Works with document classes resetting
% chapter (or section) number at each part.
% (Thanks to Denis Roegel)
% Removed stuff for \firstchapteris and co.
% These commands are obsolete.
% Removed appendix stuff.
%
% 21Dec94 Version 24
% The \protect commands have been removed from
% the .toc, .lot and .lot files, so some internal
% macros have been corrected to be compatible
% with the LaTeX2e release of December 1994.
% Thanks to Denis Roegel who did the work.
%
% 13Sep96 Version 25
% Updated mtcnorsk.sty and added mtcnynorsk.sty
% on a suggestion from Dag Langmyhr ([email protected]).
%
% 14Nov96 Version 26
% Language specific commands are now names <language>.mld
% (in place of mtc<language>.sty) because there are not
% packages and it makes shorter names.
% Added breton, estonian, germanb, greek, irish,
% russianb, scottish, lower and upper sorbian;
% renamed esperanto into esperant like in Babel.
%
% 20Dec96 Version 27
% Corrections for starred sectionning commands.
% english.mld loaded as default language.
% Added vietnam.mld.
% Added arab.mld.
% Renamed minitocoff.sty into mtcoff.sty to
% keep the name short.
%
%
% Jean-Pierre Drucbert
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\NeedsTeXFormat{LaTeX2e}[1994/12/01]%
%%% This file will not work with latex2.09
\ProvidesPackage{minitoc}[\filedate\space\fileversion\space
The minitoc package]
\typeout{*** minitoc package, version 27 ***}%
\@ifundefined{part}%
{}%
{\typeout{*** part level macros available ***}
\let\mtc@svpart\part %23
\def\part{\stepcounter{ptc}\mtc@svpart}} %23
\@ifundefined{chapter}%
{%
\@ifundefined{section}%
{\typeout{*** no section or chapter level macros available ***}%
\typeout{*** PLEASE VERIFY YOUR MAIN DOCUMENT CLASS ***}}%
{\typeout{*** section level macros available ***}
\let\mtc@svsection\section %23
\def\section{\stepcounter{stc}\mtc@svsection} %23
\let\mtc@svss\@ssect %23
%v25 \def\@ssect{\addtocounter{stc}{-1}\mtc@svss} %23
}%
}%
{\typeout{*** chapter level macros available ***}
\let\mtc@svchapter\@chapter %23
\def\@chapter{\stepcounter{mtc}\mtc@svchapter} %23
}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% ***** **** *** *****
% * * * * *
% *** * * * *
% * * * * *
% ***** **** *** *
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%\def\SHORTEXT{SHORTEXT} %%% UNCOMMENT FOR DOS AND
%%% SYSTEMS WITH SHORT EXTENSIONS
%%% TO FILE NAMES
%%% LEAVE IT COMMENTED OUT
%%% FOR UNIX AND O.S. WITH
%%% LONG EXTENSIONS
%%% YOU CAN VERIFY BY LATEXING
%%% AN EXAMPLE DOCUMENT
%%% ONE OF THE FOLLOWING MESSAGES APPEARS
%%% PLEASE CORRECT IF THE MESSAGE IS WRONG
% v27 : claim the type of system!
\@ifundefined{SHORTEXT}%
{\typeout{==> this version is configured for UNIX-like (long extensions) file names.}}%
{\typeout{==> this version is configured for MSDOS-like (8+3) file names.}}
%
%not outer version of \newread
\def\newread{\alloc@6\read\chardef\sixt@@n}
\@ifundefined{@inputcheck}%
{\typeout{Your version of latex.tex is obsolete.}%
\typeout{Trying to continue...}\newread\@inputcheck\relax}{}
\@ifundefined{reset@font}%
{\typeout{Your version of latex.tex is very obsolete.}%
\typeout{Trying to continue...}\let\reset@font\relax}{}
\newwrite\tf@mtc % a file descriptor to write minitocs
\newtoks\mtc@toks
\def\mtc@string{\relax}
\newbox\mtc@strutbox
\setbox\mtc@strutbox=\hbox{\vrule height2.5ex
depth1.8ex width\z@}
\def\mtc@strut{\relax\ifmmode\copy\mtc@strutbox\else\unhcopy\mtc@strutbox\fi}
\def\mtc@v{\leavevmode%
\mtc@strut\vphantom{Lp$^{l^l}_{p_p}$}} % a pseudo-strut ?
% \@BBR discourages page breaks
\def\@BBR{\unpenalty\nopagebreak[4]}
% Modified version to ignore the dots and the page number. % 17b
\def\@undottedtocline#1#2#3#4#5{\ifnum #1>\c@tocdepth \else % 17b
\vskip \z@ plus.2\p@ % 17b
{\leftskip #2\relax \rightskip \@tocrmarg \parfillskip -\rightskip % 17b
\parindent #2\relax\@afterindenttrue % 17b
\interlinepenalty\@M % 17b
\leavevmode % 17b
\@tempdima #3\relax \advance\leftskip \@tempdima \hbox{}% % 17b
\hskip -\leftskip % 17b
#4\nobreak\hfill \nobreak % 17b
\null\par}\fi} % 17b
%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%17b
\def\mtcpagenumbers{\let\mtc@pgno\null} %17b
\mtcpagenumbers %default %17b
\def\nomtcpagenumbers{\let\mtc@pgno\relax} %17b
\def\stcpagenumbers{\let\stc@pgno\null} %17b
\stcpagenumbers %default %17b
\def\nostcpagenumbers{\let\stc@pgno\relax} %17b
\def\ptcpagenumbers{\let\ptc@pgno\null} %17b
\ptcpagenumbers %default %17b
\def\noptcpagenumbers{\let\ptc@pgno\relax} %17b
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%17b
\def\mlfpagenumbers{\let\mlf@pgno\null} %17b
\mlfpagenumbers %default %17b
\def\nomlfpagenumbers{\let\mlf@pgno\relax} %17b
\def\slfpagenumbers{\let\slf@pgno\null} %17b
\slfpagenumbers %default %17b
\def\noslfpagenumbers{\let\slf@pgno\relax} %17b
\def\plfpagenumbers{\let\plf@pgno\null} %17b
\plfpagenumbers %default %17b
\def\noplfpagenumbers{\let\plf@pgno\relax} %17b
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%17b
\def\mltpagenumbers{\let\mlt@pgno\null} %17b
\mltpagenumbers %default %17b
\def\nomltpagenumbers{\let\mlt@pgno\relax} %17b
\def\sltpagenumbers{\let\slt@pgno\null} %17b
\sltpagenumbers %default %17b
\def\nosltpagenumbers{\let\slt@pgno\relax} %17b
\def\pltpagenumbers{\let\plt@pgno\null} %17b
\pltpagenumbers %default %17b
\def\nopltpagenumbers{\let\plt@pgno\relax} %17b
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%17b
% if you don't want a table of contents, but want minitocs,
% you need to create the .toc file, without inputing it
% into your document. This command is a stripped off version
% of \tableofcontents
\def\faketableofcontents{\fake@starttoc{toc}}
% idem for list of figures
\def\fakelistoffigures{\fake@starttoc{lof}}
% idem for list of tables
\def\fakelistoftables{\fake@starttoc{lot}}
\def\fake@starttoc#1{\begingroup
\makeatletter
\if@filesw \expandafter\newwrite\csname tf@#1\endcsname
\immediate\openout \csname tf@#1\endcsname \jobname.#1\relax
\fi \global\@nobreakfalse \endgroup}
%%
\global\let\mtc@markboth\markboth
\global\let\@mkboth\markboth
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\@ifundefined{chapter}{}{%
\def\The@chapter{\arabic{mtc}} %23
\def\firstchapteris#1%
{\typeout{^^JWARNING*** \string\firstchapteris}%
\typeout{ is an obsolete command^^J}}
\newcounter{mtc} % counter of minitocs
\setcounter{mtc}{0}
\gdef\themtc{\arabic{mtc}}
\newcounter{minitocdepth} % analog to tocdepth, but for minitocs
\setcounter{minitocdepth}{2} % default value
\def\mtc@rule{\kern-3\p@%
\hrule width \columnwidth \kern2.6\p@} % the \hrule is .4pt high
\newlength\mtcindent % indentation (left/right) of minitocs
\mtcindent=24pt % defaut value
\def\mtcfont{\small\rm} % font for the minitoc
\def\mtcSfont{\small\bf} % font for the minitoc (sections)
\def\mtcSSfont{\mtcfont} % font for the minitoc (subsections)
\def\mtcSSSfont{\mtcfont} % font for the minitoc (subsubsections)
\def\mtcPfont{\mtcfont} % font for the minitoc (paragraphs)
\def\mtcSPfont{\mtcfont} % font for the minitoc (subparagraphs)
\def\mlffont{\mtcfont} % font for the minilof (figures)
\def\mltfont{\mtcfont} % font for the minilot (tables)
\def\mtifont{\large\bf} % font for titles
% Centering, flushleft, flushright or empty titles.
\def\c@mti#1{\null\hfill #1\hfill\null}
\def\l@mti#1{\null #1\hfill\null}
\def\r@mti#1{\null\hfill #1\null}
\def\e@mti#1{\relax}
\def\n@mti#1{\relax}
% Default: titles on left
\let\do@mtitc\l@mti
\let\df@mtitc\l@mti
\let\do@mtilf\l@mti
\let\df@mtilf\l@mti
\let\do@mtilt\l@mti
\let\df@mtilt\l@mti
%v27 Language dependent names: default values. Now
%v27 english.mld is loaded first.
%v27 \@ifundefined{mtctitle}{\def\mtctitle{Contents}}{\relax}
%v27 \@ifundefined{mlftitle}{\def\mlftitle{Figures}}{\relax}
%v27 \@ifundefined{mlttitle}{\def\mlttitle{Tables}}{\relax}
\def\mtc@verse{\let\\=\@centercr
\list{}{\itemsep\z@\itemindent \z@\listparindent \itemindent
\leftmargin\mtcindent
\rightmargin\leftmargin}\item[]}
\def\endmtc@verse{\nopagebreak[4]\endlist}
% this command must be used after \chapter
% if you need a minitoc (no automatic minitoc)
\def\minitoc{\@ifnextchar[{\minitoc@}{\minitoc@[d]}}
\def\minitoc@[#1]{%
\relax\begin{samepage}% we begin a local group here, using samepage
\if #1e\let\do@mtitc\e@mti
\else\if #1n\let\do@mtitc\n@mti
\else\if #1c\let\do@mtitc\c@mti
\else\if #1l\let\do@mtitc\l@mti
\else\if #1r\let\do@mtitc\r@mti
\else\if #1d\let\do@mtitc\df@mtitc
\fi\fi\fi\fi\fi\fi
\raggedright % added #14
\parskip=\z@%
\reset@font\mtcfont%
\parindent=\z@%
\nopagebreak[4]%
\kern-0.8\baselineskip\nopagebreak[4]%
\par\noindent %%
\ifx\mtc@rule\relax
\begin{tabular}{@{}p{\columnwidth}@{}}
{\reset@font\mtifont\do@mtitc{\mtc@v\mtctitle}}\\
\end{tabular}\else
\begin{tabular}{@{}p{\columnwidth}@{}}
{\reset@font\mtifont\do@mtitc{\mtc@v\mtctitle}}\\\hline
\end{tabular}\fi
\nopagebreak[4]\null\leavevmode\vrule width \z@
height \z@ depth \z@\\\@BBR%
\leftmargin\mtcindent
\rightmargin\mtcindent
\itemindent=\z@\labelwidth=\z@%
\labelsep=\z@\listparindent=\z@%
\begin{mtc@verse}\c@tocdepth=\c@minitocdepth%
\leavevmode\\\@BBR% this blank line is necessary to avoid
% a wild negative indentation
\vskip -.5\baselineskip
\begingroup
\makeatletter
\@ifundefined{mtc@pgno}%
{\let\@dottedtocline\@undottedtocline}{}
\@ifundefined{SHORTEXT}%
{\def\@tocfile{mtc\The@chapter}}% % UNIX
{\def\@tocfile{M\The@chapter}}% % MS-DOS
\@input{\jobname.\@tocfile}\if@filesw
\fi%
\global\@nobreakfalse\endgroup
\end{mtc@verse}%
\kern0.\baselineskip%
\nopagebreak[4]\mtc@rule\null\leavevmode\\%
\vskip-1.0\baselineskip
\vrule width \z@ height \z@
depth \z@\end{samepage}% %## the \\ is essential
\par\pagebreak[1]\vspace*{-1ex}}%
% some space under the minitoc
% Added in version #13
% this command must be used after \chapter
% if you need a minilof (no automatic minilof)
\def\minilof{\@ifnextchar[{\minilof@}{\minilof@[d]}}
\def\minilof@[#1]{%
\relax\begin{samepage}% we begin a local group here, using samepage
\if #1e\let\do@mtilf\e@mti
\else\if #1n\let\do@mtilf\n@mti
\else\if #1c\let\do@mtilf\c@mti
\else\if #1l\let\do@mtilf\l@mti
\else\if #1r\let\do@mtilf\r@mti
\else\if #1d\let\do@mtilf\df@mtilf
\fi\fi\fi\fi\fi\fi
\raggedright % added #14
\parskip=\z@%
\reset@font\mlffont%
\parindent=\z@%
\nopagebreak[4]%
\kern-0.8\baselineskip\nopagebreak[4]%
\par\noindent
\ifx\mtc@rule\relax
\begin{tabular}{@{}p{\columnwidth}@{}}
{\reset@font\mtifont\do@mtilf{\mtc@v\mlftitle}}\\
\end{tabular}\else
\begin{tabular}{@{}p{\columnwidth}@{}}
{\reset@font\mtifont\do@mtilf{\mtc@v\mlftitle}}\\\hline
\end{tabular}\fi
\nopagebreak[4]\null\leavevmode\vrule width \z@
height \z@ depth \z@\\\@BBR%
\leftmargin\mtcindent
\rightmargin\mtcindent
\itemindent=\z@\labelwidth=\z@%
\labelsep=\z@\listparindent=\z@%
% depth does not matter for minilof
\begin{mtc@verse}%\c@tocdepth=\c@minitocdepth%
\leavevmode\\\@BBR% this blank line is necessary to avoid
% a wild negative indentation
\vskip -.5\baselineskip
\begingroup
\makeatletter
\@ifundefined{mlf@pgno}%
{\let@dottedtocline\@undottedtocline}{}
\@ifundefined{SHORTEXT}%
{\def\@tocfile{mlf\The@chapter}}% % UNIX
{\def\@tocfile{F\The@chapter}}% % MS-DOS
\@input{\jobname.\@tocfile}\if@filesw
\fi%
\global\@nobreakfalse\endgroup
\end{mtc@verse}%
\kern0.\baselineskip%
\nopagebreak[4]\mtc@rule\null\leavevmode\\%
\vskip-1.0\baselineskip
\vrule width \z@ height \z@
depth \z@\end{samepage}% %## the \\ is essential
\par\pagebreak[1]\vspace*{-1ex}}%
% some space under the minilof
% Added in version #13
% this command must be used after \chapter
% if you need a minilot (no automatic minilot)
\def\minilot{\@ifnextchar[{\minilot@}{\minilot@[d]}}
\def\minilot@[#1]{%
\relax\begin{samepage}% we begin a local group here, using samepage
\if #1e\let\do@mtilt\e@mti
\else\if #1n\let\do@mtilt\n@mti
\else\if #1c\let\do@mtilt\c@mti
\else\if #1l\let\do@mtilt\l@mti
\else\if #1r\let\do@mtilt\r@mti
\else\if #1d\let\do@mtilt\df@mtilt
\fi\fi\fi\fi\fi\fi
\raggedright % added #14
\parskip=\z@%
\reset@font\mltfont%
\parindent=\z@%
\nopagebreak[4]%
\kern-0.8\baselineskip\nopagebreak[4]%
\par\noindent
\ifx\mtc@rule\relax
\begin{tabular}{@{}p{\columnwidth}@{}}
{\reset@font\mtifont\do@mtilt{\mtc@v\mlttitle}}\\
\end{tabular}\else
\begin{tabular}{@{}p{\columnwidth}@{}}
{\reset@font\mtifont\do@mtilt{\mtc@v\mlttitle}}\\\hline
\end{tabular}\fi
\nopagebreak[4]\null\leavevmode\vrule width \z@
height \z@ depth \z@\\\@BBR%
\leftmargin\mtcindent
\rightmargin\mtcindent
\itemindent=\z@\labelwidth=\z@%
\labelsep=\z@\listparindent=\z@%
% depth does not matter for minilot
\begin{mtc@verse}%\c@tocdepth=\c@minitocdepth%
\leavevmode\\\@BBR% this blank line is necessary to avoid
% a wild negative indentation
\vskip -.5\baselineskip
\begingroup
\makeatletter
\@ifundefined{mlt@pgno}%
{\let\@dottedtocline\@undottedtocline}{}
\@ifundefined{SHORTEXT}%
{\def\@tocfile{mlt\The@chapter}}% % UNIX
{\def\@tocfile{T\The@chapter}}% % MS-DOS
\@input{\jobname.\@tocfile}\if@filesw
\fi%
\global\@nobreakfalse\endgroup
\end{mtc@verse}%
\kern0.\baselineskip%
\nopagebreak[4]\mtc@rule\null\leavevmode\\%
\vskip-1.0\baselineskip
\vrule width \z@ height \z@
depth \z@\end{samepage}% %## the \\ is essential
\par\pagebreak[1]\vspace*{-1ex}}%
% some space under the minilot
% I use a depth of 10000 to inhibit the printing of
% that contentsline.
\def\l@xchapter{\@dottedtocline{\@M}{1em}{2.3em}}
\def\xchapter{xchapter}
\let\sv@chapter\@chapter
\def\@chapter[#1]#2{\sv@chapter[{#1}]{#2}\relax%
\addcontentsline{lof}{xchapter}{#1}%
\addcontentsline{lot}{xchapter}{#1}%
}
% tricky code to deal with \chapter*
\let\mtc@schapter\@schapter
\def\@schapter{%
\addtocontents{toc}{\protect\chapterend}\mtc@schapter%
}
\def\@schapter{%
\addtocontents{toc}{\protect\chapterbegin}\mtc@schapter%
}
\let\chapterend\relax
\let\chapterbegin\relax
\let\appendixmtc\relax
% this command extracts info from the .toc file
% and create the .mtcN files (.mtc -> .M on MS-DOS)
\def\@dominitoc#1{{%
\makeatletter
\setcounter{mtc}{0} % START VALUE
\MTC@next#1.toc\relax\\}\setcounter{mtc}{0}} %23: raz
% this command extracts info from the .lof file
% and create the .mlfN files (.mlf -> .F on MS-DOS)
\def\@dominilof#1{{%
\makeatletter
\setcounter{mtc}{0} % START VALUE
\MLF@next#1.lof\relax\\}\setcounter{mtc}{0}} %23: raz
% this command extracts info from the .lot file
% and create the .mltN files (.mlt -> .T on MS-DOS)
\def\@dominilot#1{{%
\makeatletter
\setcounter{mtc}{0} % START VALUE
\MLT@next#1.lot\relax\\}\setcounter{mtc}{0}} %23: raz
\def\dominitoc{\@ifnextchar[{\dominitoc@}{\dominitoc@[l]}}
\def\dominilof{\@ifnextchar[{\dominilof@}{\dominilof@[l]}}
\def\dominilot{\@ifnextchar[{\dominilot@}{\dominilot@[l]}}
\def\dominitoc@[#1]{%
\if #1e\let\df@mtitc\e@mti%
\else\if #1n\let\df@mtitc\n@mti%
\else\if #1c\let\df@mtitc\c@mti%
\else\if #1l\let\df@mtitc\l@mti%
\else\if #1r\let\df@mtitc\r@mti%
\fi\fi\fi\fi\fi%
\@@dominitoc}
\def\dominilof@[#1]{%
\if #1e\let\df@mtilf\e@mti%
\else\if #1n\let\df@mtilf\n@mti%
\else\if #1c\let\df@mtilf\c@mti%
\else\if #1l\let\df@mtilf\l@mti%
\else\if #1r\let\df@mtilf\r@mti%
\fi\fi\fi\fi\fi%
\@@dominilof}
\def\dominilot@[#1]{%
\if #1e\let\df@mtilt\e@mti%
\else\if #1n\let\df@mtilt\n@mti%
\else\if #1c\let\df@mtilt\c@mti%
\else\if #1l\let\df@mtilt\l@mti%
\else\if #1r\let\df@mtilt\r@mti%
\fi\fi\fi\fi\fi%
\@@dominilot}
\def\@@dominitoc{\@dominitoc{\jobname}\immediate\closeout\tf@mtc}
\def\@@dominilof{\@dominilof{\jobname}\immediate\closeout\tf@mtc}
\def\@@dominilot{\@dominilot{\jobname}\immediate\closeout\tf@mtc}
\def\MTC@next#1\relax#2\\{%
\edef\MTC@list{#2}%
\MTC@loop{#1}}
\def\MTC@toc{%
\ifx\MTC@list\@empty\else\expandafter\MTC@explist\fi}
\def\MTC@contentsline#1#2#3{%
\gdef\themtc{\arabic{mtc}}
\expandafter%
\ifx\csname #1\endcsname\chapter\relax
\stepcounter{mtc}% % the mtc counter simulates the chapter counter
\@ifundefined{SHORTEXT}%
{\typeout{Writing\space\jobname.mtc\themtc}% % UNIX
\def\mtcname{\jobname.mtc\themtc}}% % UNIX
{\typeout{Writing\space\jobname.M\themtc}% % MS-DOS
\def\mtcname{\jobname.M\themtc}}% % MS-DOS
\immediate\closeout\tf@mtc % close current .mtcN .mtc->.M on MS-DOS
\immediate\openout\tf@mtc=\mtcname % open next .mtcN (.mtc->.M if MS-DOS)
\fi
\expandafter% % extracts and writes info for sections, etc.
\ifx\csname #1\endcsname\section\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\mtcSfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\mtcSfont%
\space #3}}}}\@tempa
\fi
\expandafter%
\ifx\csname #1\endcsname\subsection\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\mtcSSfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\mtcSSfont%
\space #3}}}}\@tempa
\fi
\expandafter%
\ifx\csname #1\endcsname\subsubsection\relax
\mtc@toks{\noexpand \leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\mtcSSSfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\mtcSSSfont%
\space #3}}}}\@tempa
\fi
\expandafter%
\ifx\csname #1\endcsname\paragraph\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\mtcPfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\mtcPfont%
\space #3}}}}\@tempa
\fi
\expandafter%
\ifx\csname #1\endcsname\subparagraph\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\mtcSPfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\mtcSPfont
\space #3}}}}\@tempa
\fi
% Added v25: \starchapter and co.
\expandafter% % extracts and writes info for sections, etc.
\ifx\csname #1\endcsname\starchapter\relax
\stepcounter{mtc}% % the mtc counter simulates the chapter counter
\@ifundefined{SHORTEXT}%
{\typeout{Writing\space\jobname.mtc\themtc}% % UNIX
\def\mtcname{\jobname.mtc\themtc}}% % UNIX
{\typeout{Writing\space\jobname.M\themtc}% % MS-DOS
\def\mtcname{\jobname.M\themtc}}% % MS-DOS
\immediate\closeout\tf@mtc % close current .mtcN .mtc->.M on MS-DOS
\immediate\openout\tf@mtc=\mtcname % open next .mtcN (.mtc->.M if MS-DOS)
\fi
\expandafter% % extracts and writes info for sections, etc.
\ifx\csname #1\endcsname\starsection\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\mtcSfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\mtcSfont%
\space #3}}}}\@tempa
\fi
\expandafter%
\ifx\csname #1\endcsname\starsubsection\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\mtcSSfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\mtcSSfont%
\space #3}}}}\@tempa
\fi
\expandafter%
\ifx\csname #1\endcsname\starsubsubsection\relax
\mtc@toks{\noexpand \leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\mtcSSSfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\mtcSSSfont%
\space #3}}}}\@tempa
\fi
\expandafter%
\ifx\csname #1\endcsname\starparagraph\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\mtcPfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\mtcPfont%
\space #3}}}}\@tempa
\fi
\expandafter%
\ifx\csname #1\endcsname\starsubparagraph\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\mtcSPfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\mtcSPfont
\space #3}}}}\@tempa
\fi
}
\def\MTC@explist{\expandafter\MTC@next\MTC@list\\}
\def\MTC@loop#1{\openin\@inputcheck#1\relax
\ifeof\@inputcheck
\typeout{^^JNo file #1^^JMINITOCS NOT PREPARED.^^J}%
\expandafter\MTC@toc
\else
\typeout{PREPARING MINITOCS FROM #1}%
\expandafter\MTC@read\fi}
\def\MTC@read{%
\read\@inputcheck to\MTC@line
\expandafter\MTC@test\MTC@line....\MTC@%
}%
\long\def\MTC@test#1#2#3#4#5\MTC@{%
\ifx#1\contentsline
\let\mtc@string\string
\MTC@contentsline{#2}{#3}{#4}%
\let\mtc@string\relax
\else\ifx#1\@input
\edef\MTC@list{\MTC@list#2\relax}%
\else\ifx#1\chapterend % \chapter* closes .mtcN (.mtc->.M on MS-DOS)
\immediate\closeout\tf@mtc
\immediate\openout\tf@mtc=\jobname.bmt % and opens a scratch file
\else\ifx#1\chapterbegin
\addtocounter{mtc}{-1}% % \chapter* has done a parasite increment
\fi\fi\fi\fi
\ifeof\@inputcheck\expandafter\MTC@toc
\else\expandafter\MTC@read\fi}%
\def\MLF@next#1\relax#2\\{%
\edef\MLF@list{#2}%
\MLF@loop{#1}}
\def\MLF@lof{%
\ifx\MLF@list\@empty\else\expandafter\MLF@explist\fi}
\def\MLF@contentsline#1#2#3{%
\gdef\themtc{\arabic{mtc}}
\expandafter%
\ifx\csname #1\endcsname\xchapter\relax
\stepcounter{mtc}% % the mtc counter simulates the chapter counter
\@ifundefined{SHORTEXT}%
{\typeout{Writing\space\jobname.mlf\themtc}% % UNIX
\def\mlfname{\jobname.mlf\themtc}}% % UNIX
{\typeout{Writing\space\jobname.F\themtc}% % MS-DOS
\def\mlfname{\jobname.F\themtc}}% % MS-DOS
\immediate\closeout\tf@mtc % close current .mlfN .mlf->.F on MS-DOS
\immediate\openout\tf@mtc=\mlfname % open next .mlfN (.mlf->.F if MS-DOS)
\fi
\expandafter% % extracts and writes info for sections, etc.
\ifx\csname #1\endcsname\figure\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\mlffont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\mlffont%
\space #3}}}}\@tempa
\fi
}
\def\MLF@explist{\expandafter\MLF@next\MLF@list\\}
\def\MLF@loop#1{\openin\@inputcheck#1\relax
\ifeof\@inputcheck
\typeout{^^JNo file #1^^JMINILOFS NOT PREPARED.^^J}%
\expandafter\MLF@lof
\else
\typeout{PREPARING MINILOFS FROM #1}%
\expandafter\MLF@read\fi}
\def\MLF@read{%
\read\@inputcheck to\MLF@line
\expandafter\MLF@test\MLF@line....\MLF@%
}%
\long\def\MLF@test#1#2#3#4#5\MLF@{%
\ifx#1\contentsline
\let\mtc@string\string
\MLF@contentsline{#2}{#3}{#4}%
\let\mtc@string\relax
\else\ifx#1\@input
\edef\MLF@list{\MLF@list#2\relax}%
\else\ifx#1\chapterend % \chapter* closes .mlfN (.mlf->.F on MS-DOS)
\immediate\closeout\tf@mtc
\immediate\openout\tf@mtc=\jobname.bmt % and opens a scratch file
\else\ifx#1\chapterbegin
\addtocounter{mtc}{-1}% % \chapter* has done a parasite increment
\fi\fi\fi\fi
\ifeof\@inputcheck\expandafter\MLF@lof
\else\expandafter\MLF@read\fi}%
\def\MLT@next#1\relax#2\\{%
\edef\MLT@list{#2}%
\MLT@loop{#1}}
\def\MLT@lot{%
\ifx\MLT@list\@empty\else\expandafter\MLT@explist\fi}
\def\MLT@contentsline#1#2#3{%
\gdef\themtc{\arabic{mtc}}
\expandafter%
\ifx\csname #1\endcsname\xchapter\relax
\stepcounter{mtc}% % the mtc counter simulates the chapter counter
\@ifundefined{SHORTEXT}%
{\typeout{Writing\space\jobname.mlt\themtc}% % UNIX
\def\mltname{\jobname.mlt\themtc}}% % UNIX
{\typeout{Writing\space\jobname.T\themtc}% % MS-DOS
\def\mltname{\jobname.T\themtc}}% % MS-DOS
\immediate\closeout\tf@mtc % close current .mltN .mlt->.T on MS-DOS
\immediate\openout\tf@mtc=\mltname % open next .mltN (.mlt->.T if MS-DOS)
\fi
\expandafter% % extracts and writes info for sections, etc.
\ifx\csname #1\endcsname\table\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\mltfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\mltfont%
\space #3}}}}\@tempa
\fi
}
\def\MLT@explist{\expandafter\MLT@next\MLT@list\\}
\def\MLT@loop#1{\openin\@inputcheck#1\relax
\ifeof\@inputcheck
\typeout{^^JNo file #1^^JMINILOTS NOT PREPARED.^^J}%
\expandafter\MLT@lot
\else
\typeout{PREPARING MINILOTS FROM #1}%
\expandafter\MLT@read\fi}
\def\MLT@read{%
\read\@inputcheck to\MLT@line
\expandafter\MLT@test\MLT@line....\MLT@%
}%
\long\def\MLT@test#1#2#3#4#5\MLT@{%
\ifx#1\contentsline
\let\mtc@string\string
\MLT@contentsline{#2}{#3}{#4}%
\let\mtc@string\relax
\else\ifx#1\@input
\edef\MLT@list{\MLT@list#2\relax}%
\else\ifx#1\chapterend % \chapter* closes .mltN (.mlt->.T on MS-DOS)
\immediate\closeout\tf@mtc
\immediate\openout\tf@mtc=\jobname.bmt % and opens a scratch file
\else\ifx#1\chapterbegin
\addtocounter{mtc}{-1}% % \chapter* has done a parasite increment
\fi\fi\fi\fi
\ifeof\@inputcheck\expandafter\MLT@lot
\else\expandafter\MLT@read\fi}%
} % end of chapter level
%%%%%%%%%%%%%%%%%%%%%%%%%
%%
% If \part is defined (book or article-like document),
% the following macros are allowed
% Sometimes, we need to make a difference between book and
% article (is \chapter defined?), to have a different layout.
\@ifundefined{part}{}%
{%
\def\xpart{xpart}
\def\Thepart{\arabic{part}}
\def\firstpartis#1%
{\typeout{^^JWARNING*** \string\firstpartis}%
\typeout{ is an obsolete command^^J}}
\newcounter{ptc} % counter of parttocs
\setcounter{ptc}{0}
\def\theptc{\arabic{ptc}}
\newcounter{parttocdepth} % analog to tocdepth, but for parttocs
\setcounter{parttocdepth}{2}
\@ifundefined{chapter}{%
\def\ptc@rule{\kern-3\p@%
\hrule width \columnwidth \kern2.6\p@}% the \hrule is .4pt high
}{\let\ptc@rule\relax} % no rule before/after parttoc/partlof/partlot
% for books
\newlength\ptcindent % indentation (left/right) of parttocs
\@ifundefined{chapter}{\ptcindent=24pt}{\ptcindent=0pt} % defaut value
\@ifundefined{chapter}{%
\def\ptcfont{\small\rm} % font for the parttoc
\def\ptcSfont{\small\bf} % font for the parttoc (sections)
\def\ptcSSfont{\ptcfont} % font for the parttoc (subsections)
\def\ptcSSSfont{\ptcfont} % font for the parttoc (subsubsections)
\def\ptcPfont{\ptcfont} % font for the parttoc (paragraphs)
\def\ptcSPfont{\ptcfont} % font for the parttoc (subparagraphs)
\def\plffont{\ptcfont} % font for the partlof (figures)
\def\pltfont{\ptcfont} % font for the partlot (tables)
\def\ptifont{\large\bf} % font for titles
}{%
\def\ptcfont{\normalsize\rm} % font for the parttoc
\def\ptcCfont{\normalsize\bf} % font for the parttoc (chapters)
\def\ptcSfont{\normalsize\rm} % font for the parttoc (sections)
\def\ptcSSfont{\ptcfont} % font for the parttoc (subsections)
\def\ptcSSSfont{\ptcfont} % font for the parttoc (subsubsections)
\def\ptcPfont{\ptcfont} % font for the parttoc (paragraphs)
\def\ptcSPfont{\ptcfont} % font for the parttoc (subparagraphs)
\def\plffont{\ptcfont} % font for the partlof (figures)
\def\pltfont{\ptcfont} % font for the partlot (tables)
\def\ptifont{\Huge\bf} % font for titles
}
% Centering, flushleft, flushright or empty titles.
\@ifundefined{chapter}{%
\def\c@pti#1{\null\hfill #1\hfill\null}
\def\l@pti#1{\null #1\hfill\null}
\def\r@pti#1{\null\hfill #1\null}
\def\e@pti#1{\relax}
\def\n@pti#1{\relax}
}{%
\def\e@pti#1{\relax}
\def\n@pti#1{\relax}
\def\l@pti#1{\if@twocolumn
\@topnewpage[\@makephead@l{#1}]%
\else
\@makephead@l{#1}%
\@afterheading
\fi}
\def\@makephead@l#1{%
\vspace*{50\p@}%
{\parindent \z@ \raggedright
\ptifont
#1\par
\nobreak
\vskip 40\p@
}}
\def\r@pti#1{\if@twocolumn
\@topnewpage[\@makephead@r{#1}]%
\else
\@makephead@r{#1}%
\@afterheading
\fi}
\def\@makephead@r#1{%
\vspace*{50\p@}%
{\parindent \z@ \raggedleft
\ptifont
#1\par
\nobreak
\vskip 40\p@
}}
\def\c@pti#1{\if@twocolumn
\@topnewpage[\@makephead@c{#1}]%
\else
\@makephead@c{#1}%
\@afterheading
\fi}
\def\@makephead@c#1{%
\vspace*{50\p@}%
{\parindent \z@ \centering
\ptifont
#1\par
\nobreak
\vskip 40\p@
}}%
}
% Default: titles on left
\let\do@ptitc\l@pti
\let\df@ptitc\l@pti
\let\do@ptilf\l@pti
\let\df@ptilf\l@pti
\let\do@ptilt\l@pti
\let\df@ptilt\l@pti
%v27 % Language dependent names: default values
%v27 \@ifundefined{chapter}{%
%v27 \@ifundefined{ptctitle}{\def\ptctitle{Contents}}{\relax}
%v27 \@ifundefined{plftitle}{\def\plftitle{Figures}}{\relax}
%v27 \@ifundefined{plttitle}{\def\plttitle{Tables}}{\relax}}%
%v27 {%
%v27 \@ifundefined{ptctitle}{\def\ptctitle{Table of Contents}}{\relax}
%v27 \@ifundefined{plftitle}{\def\plftitle{List of Figures}}{\relax}
%v27 \@ifundefined{plttitle}{\def\plttitle{List of Tables}}{\relax}
%v27 }
\def\ptc@verse{\let\\=\@centercr
\list{}{\itemsep\z@\itemindent \z@\listparindent \itemindent
\leftmargin\ptcindent
\rightmargin\leftmargin}\item[]}
\def\endptc@verse{\nopagebreak[4]\endlist}
% this command must be used after \part
% if you need a parttoc (no automatic parttoc)
\def\parttoc{\@ifnextchar[{\parttoc@}{\parttoc@[d]}}
\def\parttoc@[#1]{%
\@ifundefined{chapter}{}{\cleardoublepage
\global\let\mtc@markboth\markboth
\global\let\@mkboth\markboth
\thispagestyle{empty}
\mtc@markboth{\uppercase{\ptctitle}}{\uppercase{\ptctitle}}%
}%
\relax\begin{samepage}% we begin a local group here, using samepage
\if #1e\let\do@ptitc\e@pti
\else\if #1n\let\do@ptitc\n@pti
\else\if #1c\let\do@ptitc\c@pti
\else\if #1l\let\do@ptitc\l@pti
\else\if #1r\let\do@ptitc\r@pti
\else\if #1d\let\do@ptitc\df@ptitc
\fi\fi\fi\fi\fi\fi
\raggedright % added #14
\parskip=\z@%
\reset@font\ptcfont%
\parindent=\z@%
\nopagebreak[4]%
\kern-0.8\baselineskip\nopagebreak[4]%
\par\noindent
\nopagebreak[4]%
\ifx\ptc@rule\relax
\begin{tabular}{@{}p{\columnwidth}@{}}
{\reset@font\ptifont\do@ptitc{\mtc@v\ptctitle}}\\
\end{tabular}\else
\begin{tabular}{@{}p{\columnwidth}@{}}
{\reset@font\ptifont\do@ptitc{\mtc@v\ptctitle}}\\\hline
\end{tabular}\fi
\nopagebreak[4]\null\leavevmode\vrule width \z@
height \z@ depth \z@\\\@BBR%
\leftmargin\ptcindent
\rightmargin\ptcindent
\itemindent=\z@\labelwidth=\z@%
\labelsep=\z@\listparindent=\z@%
\begin{ptc@verse}\c@tocdepth=\c@parttocdepth%
\leavevmode\\\@BBR% this blank line is necessary to avoid
% a wild negative indentation
\vskip -.5\baselineskip
\begingroup
\makeatletter
\@ifundefined{ptc@pgno}%
{\let\@dottedtocline\@undottedtocline}{}
\@ifundefined{SHORTEXT}%
{\def\@tocfile{ptc\Thepart}}% % UNIX
{\def\@tocfile{P\Thepart}}% % MS-DOS
\@input{\jobname.\@tocfile}\if@filesw
\fi%
\global\@nobreakfalse\endgroup
\end{ptc@verse}%
\kern0.\baselineskip%
\nopagebreak[4]\ptc@rule\null\leavevmode\\%
\vskip-1.0\baselineskip
\vrule width \z@ height \z@
depth \z@\end{samepage}% %## the \\ is essential
\par\@ifundefined{chapter}{\pagebreak[1]\vspace*{-1ex}}%
{\cleardoublepage}}
% this command must be used after \part
% if you need a partlof (no automatic partlof)
\def\partlof{\@ifnextchar[{\partlof@}{\partlof@[d]}}
\def\partlof@[#1]{%
\@ifundefined{chapter}{}{\cleardoublepage
\global\let\mtc@markboth\markboth
\global\let\@mkboth\markboth
\thispagestyle{empty}
\mtc@markboth{\uppercase{\plftitle}}{\uppercase{\plftitle}}%
}%
\relax\begin{samepage}% we begin a local group here, using samepage
\if #1e\let\do@ptilf\e@pti
\else\if #1n\let\do@ptilf\n@pti
\else\if #1c\let\do@ptilf\c@pti
\else\if #1l\let\do@ptilf\l@pti
\else\if #1r\let\do@ptilf\r@pti
\else\if #1d\let\do@ptilf\df@ptilf
\fi\fi\fi\fi\fi\fi
\raggedright % added #14
\parskip=\z@%
\reset@font\plffont%
\parindent=\z@%
\nopagebreak[4]%
\kern-0.8\baselineskip\nopagebreak[4]%
\par\noindent
\ifx\ptc@rule\relax
\begin{tabular}{@{}p{\columnwidth}@{}}
{\reset@font\ptifont\do@ptilf{\mtc@v\plftitle}}\\
\end{tabular}\else
\begin{tabular}{@{}p{\columnwidth}@{}}
{\reset@font\ptifont\do@ptilf{\mtc@v\plftitle}}\\
\@ifundefined{chapter}{\hline}{}
\end{tabular}\fi
\nopagebreak[4]\null\leavevmode\vrule width \z@
height \z@ depth \z@\\\@BBR%
\leftmargin\ptcindent
\rightmargin\ptcindent
\itemindent=\z@\labelwidth=\z@%
\labelsep=\z@\listparindent=\z@%
% depth does not matter for partlof
\begin{ptc@verse}%\c@tocdepth=\c@parttocdepth%
\leavevmode\\\@BBR% this blank line is necessary to avoid
% a wild negative indentation
\vskip -.5\baselineskip
\begingroup
\makeatletter
\@ifundefined{plf@pgno}%
{\let\@dottedtocline\@undottedtocline}{}
\@ifundefined{SHORTEXT}%
{\def\@tocfile{plf\Thepart}}% % UNIX
{\def\@tocfile{G\Thepart}}% % MS-DOS
\@input{\jobname.\@tocfile}\if@filesw
\fi%
\global\@nobreakfalse\endgroup
\end{ptc@verse}%
\kern0.\baselineskip%
\nopagebreak[4]\ptc@rule\null\leavevmode\\%
\vskip-1.0\baselineskip
\vrule width \z@ height \z@
depth \z@\end{samepage}% %## the \\ is essential
\par\@ifundefined{chapter}{\pagebreak[1]\vspace*{-1ex}}%
{\cleardoublepage}}
% Added in version #13
% this command must be used after \part
% if you need a minilot (no automatic partlot)
\def\partlot{\@ifnextchar[{\partlot@}{\partlot@[d]}}
\def\partlot@[#1]{%
\@ifundefined{chapter}{}{\cleardoublepage
\global\let\mtc@markboth\markboth
\global\let\@mkboth\markboth
\thispagestyle{empty}
\mtc@markboth{\uppercase{\plttitle}}{\uppercase{\plttitle}}%
}%
\relax\begin{samepage}% we begin a local group here, using samepage
\if #1e\let\do@ptilt\e@pti
\else\if #1n\let\do@ptilt\n@pti
\else\if #1c\let\do@ptilt\c@pti
\else\if #1l\let\do@ptilt\l@pti
\else\if #1r\let\do@ptilt\r@pti
\else\if #1d\let\do@ptilt\df@ptilt
\fi\fi\fi\fi\fi\fi
\raggedright % added #14
\parskip=\z@%
\reset@font\pltfont%
\parindent=\z@%
\nopagebreak[4]%
\kern-0.8\baselineskip\nopagebreak[4]%
\par\noindent
\ifx\ptc@rule\relax
\begin{tabular}{@{}p{\columnwidth}@{}}
{\reset@font\ptifont\do@ptilt{\mtc@v\plttitle}}\\
\end{tabular}\else
\begin{tabular}{@{}p{\columnwidth}@{}}
{\reset@font\ptifont\do@ptilt{\mtc@v\plttitle}}\\
\@ifundefined{chapter}{\hline}{}
\end{tabular}\fi
\nopagebreak[4]\null\leavevmode\vrule width \z@
height \z@ depth \z@\\\@BBR%
\leftmargin\ptcindent
\rightmargin\ptcindent
\itemindent=\z@\labelwidth=\z@%
\labelsep=\z@\listparindent=\z@%
% depth does not matter for partlot
\begin{ptc@verse}%\c@tocdepth=\c@parttocdepth%
\leavevmode\\\@BBR% this blank line is necessary to avoid
% a wild negative indentation
\vskip -.5\baselineskip
\begingroup
\makeatletter
\@ifundefined{plt@pgno}%
{\let\@dottedtocline\@undottedtocline}{}
\@ifundefined{SHORTEXT}%
{\def\@tocfile{plt\Thepart}}% % UNIX
{\def\@tocfile{U\Thepart}}% % MS-DOS
\@input{\jobname.\@tocfile}\if@filesw
\fi%
\global\@nobreakfalse\endgroup
\end{ptc@verse}%
\kern0.\baselineskip%
\nopagebreak[4]\ptc@rule\null\leavevmode\\%
\vskip-1.0\baselineskip
\vrule width \z@ height \z@
depth \z@\end{samepage}% %## the \\ is essential
\par\@ifundefined{chapter}{\pagebreak[1]\vspace*{-1ex}}%
{\cleardoublepage}}
% I use a depth of 10000 to inhibit the printing of
% that contentsline.
\def\l@xpart{\@dottedtocline{\@M}{1.0em}{2.3em}}
\def\l@pchapter{\@dottedtocline{1}{1.0em}{2.3em}}
\def\pchapter{pchapter}
\let\sv@part\@part
\def\@part[#1]#2{\sv@part[{#1}]{#2}\relax%
\addcontentsline{lof}{xpart}{#1}%
\addcontentsline{lot}{xpart}{#1}%
}
% tricky code to deal with \part*
\let\ptc@spart\@spart
\def\@spart{%
\addtocontents{toc}{\protect\partend}\ptc@spart%
}
\def\@spart{%
\addtocontents{toc}{\protect\partbegin}\ptc@spart%
}
\let\partend\relax
\let\partbegin\relax
\let\appendixmtc\relax
% this command extracts info from the .toc file
% and create the .ptcN files (.ptc -> .P on MS-DOS)
\def\@doparttoc#1{{%
\makeatletter
\setcounter{ptc}{0} % START VALUE
\PTC@next#1.toc\relax\\}\setcounter{ptc}{0}} %23; raz
% this command extracts info from the .lof file
% and create the .plfN files (.plf -> .G on MS-DOS)
\def\@dopartlof#1{{%
\makeatletter
\setcounter{ptc}{0} % START VALUE
\PLF@next#1.lof\relax\\}\setcounter{ptc}{0}} %23: raz
% this command extracts info from the .lot file
% and create the .pltN files (.plt -> .U on MS-DOS)
\def\@dopartlot#1{{%
\setcounter{ptc}{0} % START VALUE
\makeatletter
\PLT@next#1.lot\relax\\}\setcounter{ptc}{0}} %23: raz
\def\doparttoc{\@ifnextchar[{\doparttoc@}{\doparttoc@[l]}}
\def\dopartlof{\@ifnextchar[{\dopartlof@}{\dopartlof@[l]}}
\def\dopartlot{\@ifnextchar[{\dopartlot@}{\dopartlot@[l]}}
\def\doparttoc@[#1]{%
\if #1e\let\df@ptitc\e@pti%
\else\if #1n\let\df@ptitc\n@pti%
\else\if #1c\let\df@ptitc\c@pti%
\else\if #1l\let\df@ptitc\l@pti%
\else\if #1r\let\df@ptitc\r@pti%
\fi\fi\fi\fi\fi%
\@@doparttoc}
\def\dopartlof@[#1]{%
\if #1e\let\df@ptilf\e@pti%
\else\if #1n\let\df@ptilf\n@pti%
\else\if #1c\let\df@ptilf\c@pti%
\else\if #1l\let\df@ptilf\l@pti%
\else\if #1r\let\df@ptilf\r@pti%
\fi\fi\fi\fi\fi%
\@@dopartlof}
\def\dopartlot@[#1]{%
\if #1e\let\df@ptilt\e@pti%
\else\if #1n\let\df@ptilt\n@pti%
\else\if #1c\let\df@ptilt\c@pti%
\else\if #1l\let\df@ptilt\l@pti%
\else\if #1r\let\df@ptilt\r@pti%
\fi\fi\fi\fi\fi%
\@@dopartlot}
\def\@@doparttoc{\@doparttoc{\jobname}\immediate\closeout\tf@mtc}
\def\@@dopartlof{\@dopartlof{\jobname}\immediate\closeout\tf@mtc}
\def\@@dopartlot{\@dopartlot{\jobname}\immediate\closeout\tf@mtc}
\def\PTC@next#1\relax#2\\{%
\edef\PTC@list{#2}%
\PTC@loop{#1}}
\def\PTC@toc{%
\ifx\PTC@list\@empty\else\expandafter\PTC@explist\fi}
\def\PTC@contentsline#1#2#3{%
\expandafter%
\ifx\csname #1\endcsname\part\relax
\stepcounter{ptc}% % the ptc counter simulates the part counter
\@ifundefined{SHORTEXT}%
{\typeout{Writing\space\jobname.ptc\theptc}% % UNIX
\def\ptcname{\jobname.ptc\theptc}}% % UNIX
{\typeout{Writing\space\jobname.P\theptc}% % MS-DOS
\def\ptcname{\jobname.P\theptc}}% % MS-DOS
\immediate\closeout\tf@mtc % close current .ptcN .ptc->.P on MS-DOS
\immediate\openout\tf@mtc=\ptcname % open next .ptcN (.ptc->.P if MS-DOS)
\fi
\expandafter% % extracts and writes info for chapters, sections, etc.
\ifx\csname #1\endcsname\chapter\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\ptcCfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\ptcCfont%
\space #3}}}}\@tempa
\fi
\expandafter%
\ifx\csname #1\endcsname\section\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\ptcSfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\ptcSfont%
\space #3}}}}\@tempa
\fi
\expandafter%
\ifx\csname #1\endcsname\subsection\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\ptcSSfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\ptcSSfont%
\space #3}}}}\@tempa
\fi
\expandafter%
\ifx\csname #1\endcsname\subsubsection\relax
\mtc@toks{\noexpand \leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\ptcSSSfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\ptcSSSfont%
\space #3}}}}\@tempa
\fi
\expandafter%
\ifx\csname #1\endcsname\paragraph\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\ptcPfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\ptcPfont%
\space #3}}}}\@tempa
\fi
\expandafter%
\ifx\csname #1\endcsname\subparagraph\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\ptcSPfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\ptcSPfont
\space #3}}}}\@tempa
\fi
% Added v25: \starchapter & co.
\expandafter% % extracts and writes info for chapters, sections, etc.
\ifx\csname #1\endcsname\starchapter\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\ptcCfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\ptcCfont%
\space #3}}}}\@tempa
\fi
\expandafter%
\ifx\csname #1\endcsname\starsection\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\ptcSfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\ptcSfont%
\space #3}}}}\@tempa
\fi
\expandafter%
\ifx\csname #1\endcsname\starsubsection\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\ptcSSfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\ptcSSfont%
\space #3}}}}\@tempa
\fi
\expandafter%
\ifx\csname #1\endcsname\starsubsubsection\relax
\mtc@toks{\noexpand \leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\ptcSSSfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\ptcSSSfont%
\space #3}}}}\@tempa
\fi
\expandafter%
\ifx\csname #1\endcsname\starparagraph\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\ptcPfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\ptcPfont%
\space #3}}}}\@tempa
\fi
\expandafter%
\ifx\csname #1\endcsname\starsubparagraph\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\ptcSPfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\ptcSPfont
\space #3}}}}\@tempa
\fi
}
\def\PTC@explist{\expandafter\PTC@next\PTC@list\\}
\def\PTC@loop#1{\openin\@inputcheck#1\relax
\ifeof\@inputcheck
\typeout{^^JNo file #1^^JPARTTOCS NOT PREPARED.^^J}%
\expandafter\PTC@toc
\else
\typeout{PREPARING PARTTOCS FROM #1}%
\expandafter\PTC@read\fi}
\def\PTC@read{%
\read\@inputcheck to\PTC@line
\expandafter\PTC@test\PTC@line....\PTC@%
}%
\long\def\PTC@test#1#2#3#4#5\PTC@{%
\ifx#1\contentsline
\let\mtc@string\string
\PTC@contentsline{#2}{#3}{#4}%
\let\mtc@string\relax
\else\ifx#1\@input
\edef\PTC@list{\PTC@list#2\relax}%
\else\ifx#1\partend % \part* closes .ptcN (.ptc->.P on MS-DOS)
\immediate\closeout\tf@mtc
\immediate\openout\tf@mtc=\jobname.bmt % and opens a scratch file
\else\ifx#1\partbegin
\addtocounter{ptc}{-1}% % \part* has done a parasite increment
\fi\fi\fi\fi
\ifeof\@inputcheck\expandafter\PTC@toc
\else\expandafter\PTC@read\fi}%
\def\PLF@next#1\relax#2\\{%
\edef\PLF@list{#2}%
\PLF@loop{#1}}
\def\PLF@lof{%
\ifx\PLF@list\@empty\else\expandafter\PLF@explist\fi}
\def\PLF@contentsline#1#2#3{%
\expandafter%
\ifx\csname #1\endcsname\xpart\relax
\stepcounter{ptc}% % the ptc counter simulates the part counter
\@ifundefined{SHORTEXT}%
{\typeout{Writing\space\jobname.plf\theptc}% % UNIX
\def\plfname{\jobname.plf\theptc}}% % UNIX
{\typeout{Writing\space\jobname.G\theptc}% % MS-DOS
\def\plfname{\jobname.G\theptc}}% % MS-DOS
\immediate\closeout\tf@mtc % close current .plfN .plf->.G on MS-DOS
\immediate\openout\tf@mtc=\plfname % open next .plfN (.plf->.G if MS-DOS)
\fi
\expandafter% % extracts and writes info for sections, etc.
\ifx\csname #1\endcsname\figure\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\plffont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\plffont%
\space #3}}}}\@tempa
\fi
}
\def\PLF@explist{\expandafter\PLF@next\PLF@list\\}
\def\PLF@loop#1{\openin\@inputcheck#1\relax
\ifeof\@inputcheck
\typeout{^^JNo file #1^^JPARTLOFS NOT PREPARED.^^J}%
\expandafter\PLF@lof
\else
\typeout{PREPARING PARTLOFS FROM #1}%
\expandafter\PLF@read\fi}
\def\PLF@read{%
\read\@inputcheck to\PLF@line
\expandafter\PLF@test\PLF@line....\PLF@%
}%
\long\def\PLF@test#1#2#3#4#5\PLF@{%
\ifx#1\contentsline
\let\mtc@string\string
\PLF@contentsline{#2}{#3}{#4}%
\let\mtc@string\relax
\else\ifx#1\@input
\edef\PLF@list{\PLF@list#2\relax}%
\else\ifx#1\partend % \part* closes .plfN (.plf->.G on MS-DOS)
\immediate\closeout\tf@mtc
\immediate\openout\tf@mtc=\jobname.bmt % and opens a scratch file
\else\ifx#1\partbegin
\addtocounter{ptc}{-1}% % \part* has done a parasite increment
\fi\fi\fi\fi
\ifeof\@inputcheck\expandafter\PLF@lof
\else\expandafter\PLF@read\fi}%
\def\PLT@next#1\relax#2\\{%
\edef\PLT@list{#2}%
\PLT@loop{#1}}
\def\PLT@lot{%
\ifx\PLT@list\@empty\else\expandafter\PLT@explist\fi}
\def\PLT@contentsline#1#2#3{%
\expandafter%
\ifx\csname #1\endcsname\xpart\relax
\stepcounter{ptc}% % the ptc counter simulates the part counter
\@ifundefined{SHORTEXT}%
{\typeout{Writing\space\jobname.plt\theptc}% % UNIX
\def\pltname{\jobname.plt\theptc}}% % UNIX
{\typeout{Writing\space\jobname.U\theptc}% % MS-DOS
\def\pltname{\jobname.U\theptc}}% % MS-DOS
\immediate\closeout\tf@mtc % close current .pltN .plt->.U on MS-DOS
\immediate\openout\tf@mtc=\pltname % open next .pltN (.plt->.U if MS-DOS)
\fi
\expandafter% % extracts and writes info for chapters, sections, etc.
\ifx\csname #1\endcsname\table\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\pltfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\pltfont%
\space #3}}}}\@tempa
\fi
}
\def\PLT@explist{\expandafter\PLT@next\PLT@list\\}
\def\PLT@loop#1{\openin\@inputcheck#1\relax
\ifeof\@inputcheck
\typeout{^^JNo file #1^^JPARTLOTS NOT PREPARED.^^J}%
\expandafter\PLT@lot
\else
\typeout{PREPARING PARTLOTS FROM #1}%
\expandafter\PLT@read\fi}
\def\PLT@read{%
\read\@inputcheck to\PLT@line
\expandafter\PLT@test\PLT@line....\PLT@%
}%
\long\def\PLT@test#1#2#3#4#5\PLT@{%
\ifx#1\contentsline
\let\mtc@string\string
\PLT@contentsline{#2}{#3}{#4}%
\let\mtc@string\relax
\else\ifx#1\@input
\edef\PLT@list{\PLT@list#2\relax}%
\else\ifx#1\partend % \part* closes .pltN (.plt->.U on MS-DOS)
\immediate\closeout\tf@mtc
\immediate\openout\tf@mtc=\jobname.bmt % and opens a scratch file
\else\ifx#1\partbegin
\addtocounter{ptc}{-1}% % \part* has done a parasite increment
\fi\fi\fi\fi
\ifeof\@inputcheck\expandafter\PLT@lot
\else\expandafter\PLT@read\fi}%
} % end of part stuff
%%%%%%%%%%%%%%%%%%%%%%%
%%% If \chapter is not defined but \section is, then
%%% the following macros are available (for article-like documents).
%%% Braces are inscrutable!
\@ifundefined{chapter}%
{\@ifundefined{section}{}{%
\def\firstsectionis#1%
{\typeout{^^JWARNING*** \string\firstsectionis}%
\typeout{ is an obsolete command^^J}}
\newcounter{stc} % counter of secttocs
\setcounter{stc}{0}
\newcounter{secttocdepth} % analog to tocdepth, but for secttocs
\setcounter{secttocdepth}{2}
% rule before/after secttoc/sectlof/sectlot
\def\stc@rule{\kern-3\p@%
\hrule width \columnwidth \kern2.6\p@} % the \hrule is .4pt high
\newlength\stcindent % indentation (left/right) of secttocs
\stcindent=24pt % defaut value
\def\stcfont{\small\rm} % font for the secttoc
\def\stcSSfont{\normalsize\bf} % font for the secttoc (subsections)
\def\stcSSSfont{\stcfont} % font for the secttoc (subsubsections)
\def\stcPfont{\stcfont} % font for the secttoc (paragraphs)
\def\stcSPfont{\stcfont} % font for the secttoc (subparagraphs)
\def\slffont{\stcfont} % font for the sectlof (figures)
\def\sltfont{\stcfont} % font for the sectlot (tables)
\def\stifont{\Large\bf} % font for titles
% Centering, flushleft, flushright or empty titles.
\def\c@sti#1{\null\hfill #1\hfill\null}
\def\l@sti#1{\null #1\hfill\null}
\def\r@sti#1{\null\hfill #1\null}
\def\e@sti#1{\relax}
\def\n@sti#1{\relax}
% Default: titles on left
\let\do@stitc\l@sti
\let\df@stitc\l@sti
\let\do@stilf\l@sti
\let\df@stilf\l@sti
\let\do@stilt\l@sti
\let\df@stilt\l@sti
%v27 % Language dependent names: default values
%v27 \@ifundefined{stctitle}{\def\stctitle{Contents}}{\relax}
%v27 \@ifundefined{slftitle}{\def\slftitle{Figures}}{\relax}
%v27 \@ifundefined{slttitle}{\def\slttitle{Tables}}{\relax}
\def\stc@verse{\let\\=\@centercr
\list{}{\itemsep\z@\itemindent \z@\listparindent \itemindent
\leftmargin\stcindent
\rightmargin\leftmargin}\item[]}
\def\endstc@verse{\nopagebreak[4]\endlist}
% this command must be used after \section
% if you need a secttoc (no automatic secttoc)
\def\secttoc{\@ifnextchar[{\secttoc@}{\secttoc@[d]}}
\def\secttoc@[#1]{%
\relax\begin{samepage}% we begin a local group here, using samepage
\if #1e\let\do@stitc\e@sti
\else\if #1n\let\do@stitc\n@sti
\else\if #1c\let\do@stitc\c@sti
\else\if #1l\let\do@stitc\l@sti
\else\if #1r\let\do@stitc\r@sti
\else\if #1d\let\do@stitc\df@stitc
\fi\fi\fi\fi\fi\fi
\raggedright % added #14
\parskip=\z@%
\reset@font\stcfont%
\parindent=\z@%
\nopagebreak[4]%
\kern-0.8\baselineskip\nopagebreak[4]%
\par\noindent
\ifx\stc@rule\relax
\begin{tabular}{@{}p{\columnwidth}@{}}
{\reset@font\stifont\do@stitc{\mtc@v\stctitle}}\\
\end{tabular}\else
\begin{tabular}{@{}p{\columnwidth}@{}}
{\reset@font\stifont\do@stitc{\mtc@v\stctitle}}\\\hline
\end{tabular}\fi
\nopagebreak[4]\null\leavevmode\vrule width \z@
height \z@ depth \z@\\\@BBR%
\leftmargin\stcindent
\rightmargin\stcindent
\itemindent=\z@\labelwidth=\z@%
\labelsep=\z@\listparindent=\z@%
\begin{stc@verse}\c@tocdepth=\c@secttocdepth%
\leavevmode\\\@BBR% this blank line is necessary to avoid
% a wild negative indentation
\vskip -.5\baselineskip
\begingroup
\makeatletter
\@ifundefined{stc@pgno}%
{\let\@dottedtocline\@undottedtocline}{}
\gdef\thestc{\arabic{stc}} %23
\@ifundefined{SHORTEXT}%
{\def\@tocfile{stc\thestc}}% % UNIX
{\def\@tocfile{S\thestc}}% % MS-DOS
\@input{\jobname.\@tocfile}\if@filesw
\fi%
\global\@nobreakfalse\endgroup
\end{stc@verse}%
\kern0.\baselineskip%
\nopagebreak[4]\stc@rule\null\leavevmode\\%
\vskip-1.0\baselineskip
\vrule width \z@ height \z@
depth \z@\end{samepage}% %## the \\ is essential
\par\pagebreak[1]\vspace*{-1ex}}%
% some space under the secttoc
% this command must be used after \section
% if you need a sectlof (no automatic sectlof)
\def\sectlof{\@ifnextchar[{\sectlof@}{\sectlof@[d]}}
\def\sectlof@[#1]{%
\relax\begin{samepage}% we begin a local group here, using samepage
\if #1e\let\do@stilf\e@sti
\else\if #1n\let\do@stilf\n@sti
\else\if #1c\let\do@stilf\c@sti
\else\if #1l\let\do@stilf\l@sti
\else\if #1r\let\do@stilf\r@sti
\else\if #1d\let\do@stilf\df@stilf
\fi\fi\fi\fi\fi\fi
\raggedright % added #14
\parskip=\z@%
\reset@font\slffont%
\parindent=\z@%
\nopagebreak[4]%
\kern-0.8\baselineskip\nopagebreak[4]%
\par\noindent
\ifx\stc@rule\relax % correction 07Nov94 v23
\begin{tabular}{@{}p{\columnwidth}@{}}
{\reset@font\stifont\do@stilf{\mtc@v\slftitle}}\\
\end{tabular}\else
\begin{tabular}{@{}p{\columnwidth}@{}}
{\reset@font\stifont\do@stilf{\mtc@v\slftitle}}\\\hline
\end{tabular}\fi
\nopagebreak[4]\null\leavevmode\vrule width \z@
height \z@ depth \z@\\\@BBR%
\leftmargin\stcindent
\rightmargin\stcindent
\itemindent=\z@\labelwidth=\z@%
\labelsep=\z@\listparindent=\z@%
% depth does not matter for sectlof
\begin{stc@verse}%\c@tocdepth=\c@secttocdepth%
\leavevmode\\\@BBR% this blank line is necessary to avoid
% a wild negative indentation
\vskip -.5\baselineskip
\begingroup
\makeatletter
\@ifundefined{slf@pgno}%
{\let\@dottedtocline\@undottedtocline}{}
\gdef\thestc{\arabic{stc}} %23
\@ifundefined{SHORTEXT}%
{\def\@tocfile{slf\thestc}}% % UNIX
{\def\@tocfile{H\thestc}}% % MS-DOS
\@input{\jobname.\@tocfile}\if@filesw
\fi%
\global\@nobreakfalse\endgroup
\end{stc@verse}%
\kern0.\baselineskip%
\nopagebreak[4]\stc@rule\null\leavevmode\\%
\vskip-1.0\baselineskip
\vrule width \z@ height \z@
depth \z@\end{samepage}% %## the \\ is essential
\par\pagebreak[1]\vspace*{-1ex}}%
% some space under the secttoc
% Added in version #13
% this command must be used after \section
% if you need a sectlot (no automatic sectlot)
\def\sectlot{\@ifnextchar[{\sectlot@}{\sectlot@[d]}}
\def\sectlot@[#1]{%
\relax\begin{samepage}% we begin a local group here, using samepage
\if #1e\let\do@stilt\e@sti
\else\if #1n\let\do@stilt\n@sti
\else\if #1c\let\do@stilt\c@sti
\else\if #1l\let\do@stilt\l@sti
\else\if #1r\let\do@stilt\r@sti
\else\if #1d\let\do@stilt\df@stilt
\fi\fi\fi\fi\fi\fi
\raggedright % added #14
\parskip=\z@%
\reset@font\sltfont%
\parindent=\z@%
\nopagebreak[4]%
\kern-0.8\baselineskip\nopagebreak[4]%
\par\noindent
\ifx\stc@rule\relax
\begin{tabular}{@{}p{\columnwidth}@{}}
{\reset@font\stifont\do@stilt{\mtc@v\slttitle}}\\
\end{tabular}\else
\begin{tabular}{@{}p{\columnwidth}@{}}
{\reset@font\stifont\do@stilt{\mtc@v\slttitle}}\\\hline
\end{tabular}\fi
\nopagebreak[4]\null\leavevmode\vrule width \z@
height \z@ depth \z@\\\@BBR%
\leftmargin\stcindent
\rightmargin\stcindent
\itemindent=\z@\labelwidth=\z@%
\labelsep=\z@\listparindent=\z@%
% depth does not matter for sectlot
\begin{stc@verse}%\c@tocdepth=\c@secttocdepth%
\leavevmode\\\@BBR% this blank line is necessary to avoid
% a wild negative indentation
\vskip -.5\baselineskip
\begingroup
\makeatletter
\@ifundefined{slt@pgno}%
{\let\@dottedtocline\@undottedtocline}{}
\gdef\thestc{\arabic{stc}}
\@ifundefined{SHORTEXT}%
{\def\@tocfile{slt\thestc}}% % UNIX
{\def\@tocfile{V\thestc}}% % MS-DOS
\@input{\jobname.\@tocfile}\if@filesw
\fi%
\global\@nobreakfalse\endgroup
\end{stc@verse}%
\kern0.\baselineskip%
\nopagebreak[4]\stc@rule\null\leavevmode\\%
\vskip-1.0\baselineskip
\vrule width \z@ height \z@
depth \z@\end{samepage}% %## the \\ is essential
\par\pagebreak[1]\vspace*{-1ex}}%
% some space under the secttoc
% I use a depth of 10000 to inhibit the printing of
% that contentsline.
\def\l@xsect{\@dottedtocline{\@M}{1.0em}{2.3em}}
\def\l@schapter{\@dottedtocline{1}{1.0em}{2.3em}}
\def\xsect{xsect}
\def\schapter{schapter}
\let\sv@sect\@sect
\gdef\@sect#1#2#3#4#5#6[#7]#8{%
\ifnum #2=1
\addcontentsline{lof}{xsect}{#7}%
\addcontentsline{lot}{xsect}{#7}%
\fi
\sv@sect{#1}{#2}{#3}{#4}{#4}{#5}{#6}[{#7}]{#8}}
\def\@sect#1#2#3#4#5#6[#7]#8{
\expandafter
\ifx\csname #1\endcsname\section\relax % ADDED
\addcontentsline{lof}{xsect}{#7}% ADDED
\addcontentsline{lot}{xsect}{#7}% ADDED
\fi % ADDED
\ifx\csname #1\endcsname\starsection\relax % ADDED v25
\addcontentsline{lof}{xsect}{#7}% ADDED v25
\addcontentsline{lot}{xsect}{#7}% ADDED v25
\fi % ADDED v25
\ifnum #2>\c@secnumdepth
\let\@svsec\@empty\else
\refstepcounter{#1}\edef\@svsec{\csname the#1\endcsname\hskip 1em}\fi
\@tempskipa #5\relax
\ifdim \@tempskipa>\z@
\begingroup #6\relax
\@hangfrom{\hskip #3\relax\@svsec}{\interlinepenalty \@M #8\par}%
\endgroup
\csname #1mark\endcsname{#7}\addcontentsline
{toc}{#1}{\ifnum #2>\c@secnumdepth \else
\protect\numberline{\csname the#1\endcsname}\fi
#7}\else
\def\@svsechd{#6\hskip #3\relax %% \relax added 2 May 90
\@svsec #8\csname #1mark\endcsname
{#7}\addcontentsline
{toc}{#1}{\ifnum #2>\c@secnumdepth \else
\protect\numberline{\csname the#1\endcsname}\fi
#7}}\fi
\@xsect{#5}}
% tricky code to deal with \section*
\let\stc@ssect\@ssect
\def\@ssect{%
\addtocontents{toc}{\protect\sectend}\stc@ssect%
}
\def\@ssect{%
\addtocontents{toc}{\protect\sectbegin}\stc@ssect%
}
\let\sectend\relax
\let\sectbegin\relax
\let\appendixmtc\relax
% this command extracts info from the .toc file
% and create the .stcN files (.stc -> .S on MS-DOS)
\def\@dosecttoc#1{{%
\makeatletter
\setcounter{stc}{0} % START VALUE
\STC@next#1.toc\relax\\}\setcounter{stc}{0}} %23: raz
% this command extracts info from the .lof file
% and create the .slfN files (.slf -> .H on MS-DOS)
\def\@dosectlof#1{{%
\makeatletter
\setcounter{stc}{0} % START VALUE
\SLF@next#1.lof\relax\\}\setcounter{stc}{0}} %23: raz
% this command extracts info from the .lot file
% and create the .sltN files (.slt -> .V on MS-DOS)
\def\@dosectlot#1{{%
\setcounter{stc}{0} % START VALUE
\makeatletter
\SLT@next#1.lot\relax\\}\setcounter{stc}{0}} %23: raz
\def\dosecttoc{\@ifnextchar[{\dosecttoc@}{\dosecttoc@[l]}}
\def\dosectlof{\@ifnextchar[{\dosectlof@}{\dosectlof@[l]}}
\def\dosectlot{\@ifnextchar[{\dosectlot@}{\dosectlot@[l]}}
\def\dosecttoc@[#1]{%
\if #1e\let\df@stitc\e@sti%
\else\if #1n\let\df@stitc\n@sti%
\else\if #1c\let\df@stitc\c@sti%
\else\if #1l\let\df@stitc\l@sti%
\else\if #1r\let\df@stitc\r@sti%
\fi\fi\fi\fi\fi%
\@@dosecttoc}
\def\dosectlof@[#1]{%
\if #1e\let\df@stilf\e@sti%
\else\if #1n\let\df@stilf\n@sti%
\else\if #1c\let\df@stilf\c@sti%
\else\if #1l\let\df@stilf\l@sti%
\else\if #1r\let\df@stilf\r@sti%
\fi\fi\fi\fi\fi%
\@@dosectlof}
\def\dosectlot@[#1]{%
\if #1e\let\df@stilt\e@sti%
\else\if #1n\let\df@stilt\n@sti%
\else\if #1c\let\df@stilt\c@sti%
\else\if #1l\let\df@stilt\l@sti%
\else\if #1r\let\df@stilt\r@sti%
\fi\fi\fi\fi\fi%
\@@dosectlot}
\def\@@dosecttoc{\@dosecttoc{\jobname}\immediate\closeout\tf@mtc}
\def\@@dosectlof{\@dosectlof{\jobname}\immediate\closeout\tf@mtc}
\def\@@dosectlot{\@dosectlot{\jobname}\immediate\closeout\tf@mtc}
\def\STC@next#1\relax#2\\{%
\edef\STC@list{#2}%
\STC@loop{#1}}
\def\STC@toc{%
\ifx\STC@list\@empty\else\expandafter\STC@explist\fi}
\def\STC@contentsline#1#2#3{%
\gdef\thestc{\arabic{stc}}
\expandafter%
\ifx\csname #1\endcsname\section\relax
\stepcounter{stc}% % the stc counter simulates the section counter
\gdef\thestc{\arabic{stc}}
\@ifundefined{SHORTEXT}%
{\typeout{Writing\space\jobname.stc\thestc}% % UNIX
\def\stcname{\jobname.stc\thestc}}% % UNIX
{\typeout{Writing\space\jobname.S\thestc}% % MS-DOS
\def\stcname{\jobname.S\thestc}}% % MS-DOS
\immediate\closeout\tf@mtc % close current .stcN .stc->.S on MS-DOS
\immediate\openout\tf@mtc=\stcname % open next .stcN (.stc->.S if MS-DOS)
\fi
\expandafter%
\ifx\csname #1\endcsname\subsection\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\stcSSfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\stcSSfont%
\space #3}}}}\@tempa
\fi
\expandafter%
\ifx\csname #1\endcsname\subsubsection\relax
\mtc@toks{\noexpand \leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\stcSSSfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\stcSSSfont%
\space #3}}}}\@tempa
\fi
\expandafter%
\ifx\csname #1\endcsname\paragraph\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\stcPfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\stcPfont%
\space #3}}}}\@tempa
\fi
\expandafter%
\ifx\csname #1\endcsname\subparagraph\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\stcSPfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\stcSPfont
\space #3}}}}\@tempa
\fi
% Added v25: \starsection and co.
\ifx\csname #1\endcsname\starsection\relax
\stepcounter{stc}% % the stc counter simulates the section counter
\gdef\thestc{\arabic{stc}}
\@ifundefined{SHORTEXT}%
{\typeout{Writing\space\jobname.stc\thestc}% % UNIX
\def\stcname{\jobname.stc\thestc}}% % UNIX
{\typeout{Writing\space\jobname.S\thestc}% % MS-DOS
\def\stcname{\jobname.S\thestc}}% % MS-DOS
\immediate\closeout\tf@mtc % close current .stcN .stc->.S on MS-DOS
\immediate\openout\tf@mtc=\stcname % open next .stcN (.stc->.S if MS-DOS)
\fi
\expandafter%
\ifx\csname #1\endcsname\starsubsection\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\stcSSfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\stcSSfont%
\space #3}}}}\@tempa
\fi
\expandafter%
\ifx\csname #1\endcsname\starsubsubsection\relax
\mtc@toks{\noexpand \leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\stcSSSfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\stcSSSfont%
\space #3}}}}\@tempa
\fi
\expandafter%
\ifx\csname #1\endcsname\starparagraph\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\stcPfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\stcPfont%
\space #3}}}}\@tempa
\fi
\expandafter%
\ifx\csname #1\endcsname\starsubparagraph\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\stcSPfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\stcSPfont
\space #3}}}}\@tempa
\fi
}
\def\STC@explist{\expandafter\STC@next\STC@list\\}
\def\STC@loop#1{\openin\@inputcheck#1\relax
\ifeof\@inputcheck
\typeout{^^JNo file #1^^JSECTTOCS NOT PREPARED.^^J}%
\expandafter\STC@toc
\else
\typeout{PREPARING SECTTOCS FROM #1}%
\expandafter\STC@read\fi}
\def\STC@read{%
\read\@inputcheck to\STC@line
\expandafter\STC@test\STC@line....\STC@%
}%
\long\def\STC@test#1#2#3#4#5\STC@{%
\ifx#1\contentsline
\let\mtc@string\string
\STC@contentsline{#2}{#3}{#4}%
\let\mtc@string\relax
\else\ifx#1\@input
\edef\STC@list{\STC@list#2\relax}%
\else\ifx#1\sectend % \section* closes .stcN (.stc->.S on MS-DOS)
\immediate\closeout\tf@mtc
\immediate\openout\tf@mtc=\jobname.bmt % and opens a scratch file
\else\ifx#1\sectbegin
\addtocounter{stc}{-1}% % \section* has done a parasite increment
\fi\fi\fi\fi
\ifeof\@inputcheck\expandafter\STC@toc
\else\expandafter\STC@read\fi}%
\def\SLF@next#1\relax#2\\{%
\edef\SLF@list{#2}%
\SLF@loop{#1}}
\def\SLF@lof{%
\ifx\SLF@list\@empty\else\expandafter\SLF@explist\fi}
\def\SLF@contentsline#1#2#3{%
\gdef\thestc{\arabic{stc}}
\expandafter%
\ifx\csname #1\endcsname\xsect\relax
\stepcounter{stc}% % the stc counter simulates the section counter
\gdef\thestc{\arabic{stc}}
\@ifundefined{SHORTEXT}%
{\typeout{Writing\space\jobname.slf\thestc}% % UNIX
\def\slfname{\jobname.slf\thestc}}% % UNIX
{\typeout{Writing\space\jobname.G\thestc}% % MS-DOS
\def\slfname{\jobname.H\thestc}}% % MS-DOS
\immediate\closeout\tf@mtc % close current .slfN .slf->.H on MS-DOS
\immediate\openout\tf@mtc=\slfname % open next .slfN (.slf->.H if MS-DOS)
\fi
\expandafter% % extracts and writes info for sections, etc.
\ifx\csname #1\endcsname\figure\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\slffont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\slffont%
\space #3}}}}\@tempa
\fi
}
\def\SLF@explist{\expandafter\SLF@next\SLF@list\\}
\def\SLF@loop#1{\openin\@inputcheck#1\relax
\ifeof\@inputcheck
\typeout{^^JNo file #1^^JSECTLOFS NOT PREPARED.^^J}%
\expandafter\SLF@lof
\else
\typeout{PREPARING SECTLOFS FROM #1}%
\expandafter\SLF@read\fi}
\def\SLF@read{%
\read\@inputcheck to\SLF@line
\expandafter\SLF@test\SLF@line....\SLF@%
}%
\long\def\SLF@test#1#2#3#4#5\SLF@{%
\ifx#1\contentsline
\let\mtc@string\string
\SLF@contentsline{#2}{#3}{#4}%
\let\mtc@string\relax
\else\ifx#1\@input
\edef\SLF@list{\SLF@list#2\relax}%
\else\ifx#1\sectend % \section* closes .slfN (.slf->.H on MS-DOS)
\immediate\closeout\tf@mtc
\immediate\openout\tf@mtc=\jobname.bmt % and opens a scratch file
\else\ifx#1\sectbegin
\addtocounter{stc}{-1}% % \section* has done a parasite increment
\fi\fi\fi\fi
\ifeof\@inputcheck\expandafter\SLF@lof
\else\expandafter\SLF@read\fi}%
\def\SLT@next#1\relax#2\\{%
\edef\SLT@list{#2}%
\SLT@loop{#1}}
\def\SLT@lot{%
\ifx\SLT@list\@empty\else\expandafter\SLT@explist\fi}
\def\SLT@contentsline#1#2#3{%
\gdef\thestc{\arabic{stc}}
\expandafter%
\ifx\csname #1\endcsname\xsect\relax
\stepcounter{stc}% % the stc counter simulates the section counter
\gdef\thestc{\arabic{stc}}
\@ifundefined{SHORTEXT}%
{\typeout{Writing\space\jobname.slt\thestc}% % UNIX
\def\mltname{\jobname.slt\thestc}}% % UNIX
{\typeout{Writing\space\jobname.V\thestc}% % MS-DOS
\def\sltname{\jobname.V\thestc}}% % MS-DOS
\immediate\closeout\tf@mtc % close current .sltN .slt->.V on MS-DOS
\immediate\openout\tf@mtc=\sltname % open next .sltN (.slt->.V if MS-DOS)
\fi
\expandafter% % extracts and writes info for subsections, etc.
\ifx\csname #1\endcsname\table\relax
\mtc@toks{\noexpand\leavevmode#2}%
\edef\@tempa{\immediate\write\tf@mtc {%
{\string\reset@font\string\sltfont\string\mtc@string%
\string\contentsline{#1}%
{\noexpand\the\mtc@toks}{\string\reset@font\string\sltfont%
\space #3}}}}\@tempa
\fi
}
\def\SLT@explist{\expandafter\SLT@next\SLT@list\\}
\def\SLT@loop#1{\openin\@inputcheck#1\relax
\ifeof\@inputcheck
\typeout{^^JNo file #1^^JSECTLOTS NOT PREPARED.^^J}%
\expandafter\SLT@lot
\else
\typeout{PREPARING SECTLOTS FROM #1}%
\expandafter\SLT@read\fi}
\def\SLT@read{%
\read\@inputcheck to\SLT@line
\expandafter\SLT@test\SLT@line....\SLT@%
}%
\long\def\SLT@test#1#2#3#4#5\SLT@{%
\ifx#1\contentsline
\let\mtc@string\string
\SLT@contentsline{#2}{#3}{#4}%
\let\mtc@string\relax
\else\ifx#1\@input
\edef\SLT@list{\SLT@list#2\relax}%
\else\ifx#1\sectend % \section* closes .sltN (.slt->.V on MS-DOS)
\immediate\closeout\tf@mtc
\immediate\openout\tf@mtc=\jobname.bmt % and opens a scratch file
\else\ifx#1\sectbegin
\addtocounter{stc}{-1}% % \section* has done a parasite increment
\fi\fi\fi\fi
\ifeof\@inputcheck\expandafter\SLT@lot
\else\expandafter\SLT@read\fi}%
}}{}
\@ifundefined{section}{}{\let\l@listof\l@section} %v27
\@ifundefined{chapter}{}{\let\l@listof\l@chapter} %v27
\@ifundefined{part}{}{\let\l@starpart\l@part}
\@ifundefined{chapter}{}{\let\l@starchapter\l@chapter}
\@ifundefined{section}{}{\let\l@starsection\l@section}
\@ifundefined{subsection}{}{\let\l@starsubsection\l@subsection}
\@ifundefined{subsubsection}{}{\let\l@starsubsubsection\l@subsubsection}
\@ifundefined{paragraph}{}{\let\l@starparagraph\l@paragraph}
\@ifundefined{subparagraph}{}{\let\l@starsubparagraph\l@subparagraph}
\def\noptcrule{\let\ptc@rule\relax}
\def\nomtcrule{\let\mtc@rule\relax}
\def\nostcrule{\let\stc@rule\relax}
\def\ptcrule{\def\ptc@rule{\kern-3\p@%
\hrule width \columnwidth \kern2.6\p@}} % the \hrule is .4pt high
\def\mtcrule{\def\mtc@rule{\kern-3\p@%
\hrule width \columnwidth \kern2.6\p@}} % the \hrule is .4pt high
\def\stcrule{\def\stc@rule{\kern-3\p@%
\hrule width \columnwidth \kern2.6\p@}} % the \hrule is .4pt high
%%%% Language dependent part
\DeclareOption{american}{\input{english.mld}}
\DeclareOption{austrian}{\input{german.mld}}
\DeclareOption{brazil}{\input{portuges.mld}}
\DeclareOption{breton}{\input{breton.mld}} %v26
\DeclareOption{catalan}{\input{catalan.mld}}
\DeclareOption{croatian}{\input{croatian.mld}}
\DeclareOption{czech}{\input{czech.mld}}
\DeclareOption{danish}{\input{danish.mld}}
\DeclareOption{dutch}{\input{dutch.mld}}
\DeclareOption{english}{\input{english.mld}}
\DeclareOption{esperant}{\input{esperant.mld}} %v26
\DeclareOption{esperanto}{\input{esperant.mld}} %v26
\DeclareOption{finnish}{\input{finnish.mld}}
\DeclareOption{francais}{\input{french.mld}}
\DeclareOption{french}{\input{french.mld}}
\DeclareOption{galician}{\input{galician.mld}}
\DeclareOption{german}{\input{german.mld}}
\DeclareOption{germanb}{\input{germanb.mld}} %v26
\DeclareOption{greek}{\input{greek.mld}} %v26
\DeclareOption{hungarian}{\input{magyar.mld}}
\DeclareOption{irish}{\input{irish.mld}} %v26
\DeclareOption{italian}{\input{italian.mld}}
\DeclareOption{lsorbian}{\input{lsorbian.mld}} %v26
\DeclareOption{magyar}{\input{magyar.mld}}
\DeclareOption{norsk}{\input{norsk.mld}}
\DeclareOption{nynorsk}{\input{nynorsk.mld}} %v25
\DeclareOption{polish}{\input{polish.mld}}
\DeclareOption{portuges}{\input{portuges.mld}}
\DeclareOption{romanian}{\input{romanian.mld}}
%%%%russian not supported \DeclareOption{russian}{\input{russian.mld}}
\DeclareOption{russianb}{\input{russianb.mld}} %v26
\DeclareOption{scottish}{\input{scottish.mld}} %v26
\DeclareOption{slovak}{\input{slovak.mld}}
\DeclareOption{slovene}{\input{slovene.mld}}
\DeclareOption{spanish}{\input{spanish.mld}}
\DeclareOption{swedish}{\input{swedish.mld}}
\DeclareOption{turkish}{\input{turkish.mld}}
\DeclareOption{usorbian}{\input{usorbian.mld}} %v26
\DeclareOption{vietnam}{\input{vietnam.mld}} %v27
\DeclareOption{vietnamese}{\input{vietnam.mld}} %v27
\DeclareOption{arab}{\input{arab.mld}} %v27
\DeclareOption{arabic}{\input{arab.mld}} %v27
\ExecuteOptions{english} %v27 % default
\ProcessOptions*
%%\languagespecific{russian.dtx}
%%
%% \CharacterTable
%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%% Digits \0\1\2\3\4\5\6\7\8\9
%% Exclamation \! Double quote \" Hash (number) \#
%% Dollar \$ Percent \% Ampersand \&
%% Acute accent \' Left paren \( Right paren \)
%% Asterisk \* Plus \+ Comma \,
%% Minus \- Point \. Solidus \/
%% Colon \: Semicolon \; Less than \<
%% Equals \= Greater than \> Question mark \?
%% Commercial at \@ Left bracket \[ Backslash \\
%% Right bracket \] Circumflex \^ Underscore \_
%% Grave accent \` Left brace \{ Vertical bar \|
%% Right brace \} Tilde \~}
\endinput
%%
%% End of file `minitoc.sty'.
|
