% \iffalse meta-comment
%
% Copyright 1993 1994 1995 1996 1997 1998 1999
% The LaTeX3 Project and any individual authors listed elsewhere
% in this file.
%
% This file is part of the LaTeX2e system.
% ----------------------------------------
%
% It may be distributed under the terms of the LaTeX Project Public
% License, as described in lppl.txt in the base LaTeX distribution.
% Either version 1.0 or, at your option, any later version.
%
% \fi
%
% \iffalse
%%% From File: ltsect.dtx
%<*driver>
% \fi
\ProvidesFile{ltsect.dtx}[1996/12/20 v1.0z LaTeX Kernel (Sectioning)]
% \iffalse
\documentclass{ltxdoc}
\GetFileInfo{ltsect.dtx}
\title{\filename}
\date{\filedate}
\author{%
Johannes Braams\and
David Carlisle\and
Alan Jeffrey\and
Leslie Lamport\and
Frank Mittelbach\and
Chris Rowley\and
Tobias Oetiker\thanks{Tobi updated
the comments to `doc' conventions}\and
Rainer Sch\"opf}
\begin{document}
\maketitle
\DocInput{\filename}
\end{document}
%</driver>
% \fi
%
% \CheckSum{363}
%
% \changes{v1.0o}{1995/05/07}{Use \cs{hb@xt@}}
% \changes{v1.0y}{1996/10/31}{Corrected and tidied documentation;
% removed long lines}
%
%
% \section{Sectioning Commands}
%
% This file defines the declarations such as |\author| which are used
% by |\maketitle|. |\maketitle| itself is defined by each class, not
% in the \LaTeX{} kernel.
%
% The second part of the file defines the generic commands used for
% defining sectioning commands such as |\chapter|. Again the actual
% document level commands are defined in the class files, in terms of
% these commands.
%
% \StopEventually{}
%
%
% \changes{v1.0a}{1994/03/04}{Initial version, split from latex.dtx}
% \changes{v1.0b}{1994/03/28}{Split further from ltherest.dtx}
% \changes{v1.0d}{1994/05/21}{Use new error commands}
% \changes{v1.0f}{1994/10/12}{Doc. typos}
% \changes{v1.0g}{1994/10/18}{Added \cs{normalcolor}}
% \changes{v1.0i}{1994/11/17}
% {\cs{@tempa} to \cs{reserved@a}}
% \changes{v1.0m}{1995/05/03}{TO: Promoted documentation to doc.sty
% standard}
%
% \begin{macrocode}
%<*2ekernel>
\message{title,}
% \end{macrocode}
%
% \subsection{The Title}
%
% \DescribeMacro{\title}
% The user defines the title and author by the declarations
% |\title|\marg{name},
% \DescribeMacro{\author}
% |\author|\marg{name}
%
% \DescribeMacro{\date}
% Similarly the date is declared with
% |\date|\marg{date}.
%
% \DescribeMacro{\thanks}
% Inside these, the |\thanks|\marg{footnote text} command may be used
% to make acknowledgements, notice of address, etc.\ in a footnote.
% \DescribeMacro{\and}
% If there are multiple authors, they have to be separated with the
% |\and| command.
%
% \DescribeMacro{\maketitle}
% And finally, the |\maketitle| command produces the actual title,
% using the information previously saved with the other commands.
%
% \begin{macro}{\title}
% \begin{macro}{\@title}
% \changes{LaTeX2e}{1993/12/11}{Added default}
% |\title| for use in |\maketitle|. If not given |\maketitle| will
% produce an error message.
% \begin{macrocode}
\def\title#1{\gdef\@title{#1}}
\def\@title{\@latex@error{No \noexpand\title given}\@ehc}
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\author}
% \begin{macro}{\@author}
% \changes{LaTeX2e}{1993/12/11}{Added default}
%
% |\author| for use in |\maketitle|. If not given |\maketitle| will
% produce a warning message.
%
% \begin{macrocode}
\def\author#1{\gdef\@author{#1}}
\def\@author{\@latex@warning@no@line{No \noexpand\author given}}
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\date}
% \begin{macro}{\@date}
% |\date| for use in |\maketitle|. If not given |\maketitle| will
% produce |\today| as the default.
% \begin{macrocode}
\def\date#1{\gdef\@date{#1}}
\gdef\@date{\today}
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \changes{1.0h}{1994/11/04}{(ASAJ) Added \cs{protected@xdef} to
% \cs{thanks}.}
% \begin{macro}{\thanks}
% \begin{macrocode}
\def\thanks#1{\footnotemark
\protected@xdef\@thanks{\@thanks
\protect\footnotetext[\the\c@footnote]{#1}}%
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@thanks}
% \begin{macrocode}
\let\@thanks\@empty
% \end{macrocode}
% \end{macro}
% \begin{macro}{\and}
% \begin{macrocode}
\def\and{% % \begin{tabular}
\end{tabular}%
\hskip 1em \@plus.17fil%
\begin{tabular}[t]{c}}% % \end{tabular}
% \end{macrocode}
% \end{macro}
%
% \begin{macrocode}
\message{sectioning,}
% \end{macrocode}
% \subsection{Sectioning}
%
%
% \begin{macro}{\@secpenalty}
% \begin{macrocode}
\newcount\@secpenalty
\@secpenalty = -300
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\if@noskipsec}
% \begin{macro}{\@noskipsectrue}
% \changes{1.0w}{1996/09/29}{Added documentation}
% Way back in 1991 (08/26) FMi \& RmS set the |\@noskipsec| switch
% to true for the preamble and to false in |\document|.
% This was done to trap lists and related text in the preamble but it
% does not catch everything.
% \begin{macrocode}
\newif\if@noskipsec \@noskipsectrue
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@startsection}
%
% The |\@startsection{|\meta{name}|}{|\meta{level}|}{|%
% \meta{indent}|}{|\meta{beforeskip}|}|\\
% |{|\meta{afterskip}|}{|\meta{style}|}*[|\meta{altheading}%
% |]{|\meta{heading}|}|
% command is the mother of all the user level sectioning commands.
% The part after the |*|, including the |*| is optional.
%
% \begin{description}
% \item[name:] e.g., 'subsection'
% \item[level:] a number, denoting depth of section -- e.g., chapter=1,
% section = 2, etc.
% \item[indent:] Indentation of heading from left margin
% \item[beforeskip:] Absolute value = skip to leave above the heading.
% If negative, then paragraph indent of text following
% heading is suppressed.
% \item[afterskip:] if positive, then skip to leave below heading, else
% negative of skip to leave to right of run-in heading.
% \item[style:] Commands to set style. Since June 1996 release the
% \emph{last} command in this argument may be a command
% such as |\MakeUppercase| or |\fbox| that takes an
% argument. The section heading will be supplied as the
% argument to this command. So setting |#6| to, say,
% |\bfseries\MakeUppercase| would produce bold,
% uppercase headings.
% \end{description}
%
% If `|*|' is missing, then increment the counter. If it is
% present, then there should be no |[|\meta{altheading}|]| argument.
% The command uses the counter 'secnumdepth'. It contains a pointer
% to the highest section level that is to be numbered.
%
% \textbf{Warning:}
% The |\@startsection| command should be at the same or higher
% grouping level as the text that follows it. For example, you should
% \emph{not} do something like
% \begin{verbatim}
% \def\foo{ \begingroup ...
% \paragraph{...}
% \endgroup}
% \end{verbatim}
%
% Pseudocode for the |\@startsection| command
% \begin{oldcomments}
% \@startsection {NAME}{LEVEL}{INDENT}{BEFORESKIP}{AFTERSKIP}{STYLE} ==
% BEGIN
% IF @noskipsec = T THEN \leavevmode FI
% % true if previous section had no body.
%
% \par
% \@tempskipa := BEFORESKIP
% @afterindent := T
% IF \@tempskipa < 0 THEN \@tempskipa := -\@tempskipa
% @afterindent := F
% FI
% IF @nobreak = true
% THEN \everypar == null
% ELSE \addpenalty{\@secpenalty}
% \addvspace{\@tempskipa}
% FI
% IF * next
% THEN \@ssect{INDENT}{BEFORESKIP}{AFTERSKIP}{STYLE}
% ELSE \@dblarg{\@sect
% {NAME}{LEVEL}{INDENT}
% {BEFORESKIP}{AFTERSKIP}{STYLE}}
% FI
% END
% \end{oldcomments}
%
% \begin{macrocode}
\def\@startsection#1#2#3#4#5#6{%
\if@noskipsec \leavevmode \fi
\par
\@tempskipa #4\relax
\@afterindenttrue
\ifdim \@tempskipa <\z@
\@tempskipa -\@tempskipa \@afterindentfalse
\fi
\if@nobreak
\everypar{}%
\else
\addpenalty\@secpenalty\addvspace\@tempskipa
\fi
\@ifstar
{\@ssect{#3}{#4}{#5}{#6}}%
{\@dblarg{\@sect{#1}{#2}{#3}{#4}{#5}{#6}}}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@sect}
% Pseudocode for the |\@sect| command
% \begin{oldcomments}
% \@sect{NAME}{LEVEL}{INDENT}{BEFORESKIP}{AFTERSKIP}{STYLE}[ARG1]{ARG2}
% ==
% BEGIN
% IF LEVEL > \c@secnumdepth
% THEN \@svsec :=L null
% ELSE \refstepcounter{NAME}
% \@svsec :=L BEGIN \@seccntformat{#1}\relax END
% FI
% IF AFTERSKIP > 0
% THEN \begingroup
% STYLE
% \@hangfrom{\hskip INDENT\@svsec}
% {\interlinepenalty 10000 ARG2\par}
% \endgroup
% \NAMEmark{ARG1}
% \addcontentsline{toc}{NAME}
% { IF LEVEL > \c@secnumdepth
% ELSE \protect\numberline{\theNAME} FI
% ARG1 }
% ELSE \@svsechd == BEGIN STYLE
% \hskip INDENT\@svsec
% ARG2
% \NAMEmark{ARG1}
% \addcontentsline{toc}{NAME}
% { IF LEVEL > \c@secnumdepth
% ELSE
% \protect\numberline{\theNAME}
% FI
% ARG1 }
% END
% FI
% \@xsect{AFTERSKIP}
% END
% \end{oldcomments}
%
% \changes{LaTeX2.09}{1992/08/25}
% {(FMi) replaced explicit setting of \cs{@svsec}
% by call to \cs{@seccntformat}}
% \changes{LaTeX2.09}{1993/08/05}
% {(RmS) Made sure that \cs{protect} works correctly in
% expansion of \cs{the} counter}
% \changes{1.0h}{1994/11/04}
% {(ASAJ) Added \cs{protected@edef}.}
% \begin{macrocode}
\def\@sect#1#2#3#4#5#6[#7]#8{%
\ifnum #2>\c@secnumdepth
\let\@svsec\@empty
\else
\refstepcounter{#1}%
% \end{macrocode}
% Since |\@seccntformat| might end with an improper |\hskip| which
% is scanning forward for |plus| or |minus| we end the definition
% of |\@svsec| with |\relax| as a precaution.
% \changes{1.0n}{1995/05/06}{Added \cs{relax} after
% \cs{@seccntformat} just in case}
% \begin{macrocode}
\protected@edef\@svsec{\@seccntformat{#1}\relax}%
\fi
\@tempskipa #5\relax
\ifdim \@tempskipa>\z@
\begingroup
% \end{macrocode}
% \changes{v1.0s}{1996/05/21}
% {(DPC) Moved brace to allow commands like
% \cs{MakeUppercase} in 6th argument.
% Changed \cs{par} to \cs{endgraf} to allow non-long
% commands. internal/2148}
% \changes{v1.0t}{1996/06/10}
% {(DPC) Changed \cs{endgraf} to \cs{@@par}}
% This |{| used to be after the argument to |\@hangfrom| but was moved
% here to allow commands such as |\MakeUppercase| to be used at the end
% of |#6|.
% \begin{macrocode}
#6{%
\@hangfrom{\hskip #3\relax\@svsec}%
\interlinepenalty \@M #8\@@par}%
\endgroup
\csname #1mark\endcsname{#7}%
\addcontentsline{toc}{#1}{%
\ifnum #2>\c@secnumdepth \else
\protect\numberline{\csname the#1\endcsname}%
\fi
#7}%
\else
% \end{macrocode}
% |\relax| added 2 May 90
% \changes{v1.0s}{1996/05/21}
% {(DPC) Added extra braces for internal/2148}
% \begin{macrocode}
\def\@svsechd{%
#6{\hskip #3\relax
\@svsec #8}%
\csname #1mark\endcsname{#7}%
\addcontentsline{toc}{#1}{%
\ifnum #2>\c@secnumdepth \else
\protect\numberline{\csname the#1\endcsname}%
\fi
#7}}%
\fi
\@xsect{#5}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@xsect}%
% Pseudocode for the |\@xsect| command
% \begin{oldcomments}
% \@xsect{AFTERSKIP} ==
% BEGIN
% IF AFTERSKIP > 0
% THEN \par \nobreak
% \vskip AFTERSKIP
% \@afterheading
% ELSE @nobreak :=G F
% @noskipsec :=G T
% \everypar{ IF @noskipsec = T
% THEN @noskipsec :=G F
% \clubpenalty :=G 10000
% \hskip -\parindent
% \begingroup
% \@svsechd
% \endgroup
% \unskip
% \hskip -AFTERSKIP \relax
% %% relax added 14 Jan 91
% ELSE \clubpenalty :=G \@clubpenalty
% \everypar := NULL
% FI
% }
% FI
%
% END
% \end{oldcomments}
%
% \changes{0.0}{1992/08/19}
% {(RmS) corrected bug: stretch and shrink in argument to
% \cs{hskip} previously not negated}
% \begin{macrocode}
\def\@xsect#1{%
\@tempskipa #1\relax
\ifdim \@tempskipa>\z@
% \end{macrocode}
% Why not combine |\@sect| and |\@xsect| and save doing the
% same test twice? It is not possible to change this now as these
% have become hooks!
%
% This |\par| seems unnecessary.
% \begin{macrocode}
\par \nobreak
\vskip \@tempskipa
\@afterheading
\else
% \end{macrocode}
% \changes{v1.0u}{1996/07/26}{Removed \cs{global} before
% \cs{@nobreak...}}
% \changes{v1.0x}{1996/10/23}{Replaced \cs{hskip...} with \cs{setbox...}
% as used in \cs{@afterheading}}
% \begin{macrocode}
\@nobreakfalse
\global\@noskipsectrue
\everypar{%
\if@noskipsec
\global\@noskipsecfalse
{\setbox\z@\lastbox}%
\clubpenalty\@M
\begingroup \@svsechd \endgroup
\unskip
\@tempskipa #1\relax
\hskip -\@tempskipa
\else
\clubpenalty \@clubpenalty
\everypar{}%
\fi}%
\fi
\ignorespaces}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@seccntformat}
% This command formats the section number including the space
% following it.
% \changes{1.0n}{1995/05/06}{Use \cs{quad} instead of \cs{hskip}}
% \begin{macrocode}
\def\@seccntformat#1{\csname the#1\endcsname\quad}
% \end{macrocode}
% \end{macro}
%
% Pseudocode for the |\@ssect| command
% \begin{oldcomments}
% \@ssect{INDENT}{BEFORESKIP}{AFTERSKIP}{STYLE}{ARG} ==
% BEGIN
% IF AFTERSKIP > 0
% THEN \begingroup
% STYLE
% \@hangfrom{\hskip INDENT}{\interlinepenalty 10000 ARG\par}
% \endgroup
% ELSE \@svsechd == BEGIN STYLE
% \hskip INDENT
% ARG
% END
% FI
% \@xsect{AFTERSKIP}
% END
% \end{oldcomments}
%
% Pseudocode for the |\@afterheading| command
% \begin{oldcomments}
% \@afterheading ==
% BEGIN
% @nobreak :=G true
% \everypar := BEGIN IF @nobreak = T
% THEN @nobreak :=G false
% \clubpenalty :=G 10000
% IF @afterindent = F
% THEN remove \lastbox
% FI
% ELSE \clubpenalty :=G \@clubpenalty
% \everypar := NULL
% FI
% END
% END
% \end{oldcomments}
%
%
% \begin{macro}{\@ssect}
% \begin{macrocode}
\def\@ssect#1#2#3#4#5{%
\@tempskipa #3\relax
\ifdim \@tempskipa>\z@
\begingroup
% \end{macrocode}
% \changes{v1.0s}{1996/05/21}
% {(DPC) Moved brace to allow commands like
% \cs{MakeUppercase} in 4th argument.
% Changed \cs{par} to \cs{endgraf} to allow non-long
% commands. internal/2148}
% \changes{v1.0t}{1996/06/10}
% {(DPC) Changed \cs{endgraf} to \cs{@@par}}
% This |{| used to be after the argument to |\@hangfrom| but was moved
% here to allow commands such as |\MakeUppercase| to be used at the end
% of |#4|.
% \begin{macrocode}
#4{%
\@hangfrom{\hskip #1}%
\interlinepenalty \@M #5\@@par}%
\endgroup
\else
% \end{macrocode}
% \changes{v1.0s}{1996/05/21}
% {(DPC) Added extra braces for internal/2148}
% \begin{macrocode}
\def\@svsechd{#4{\hskip #1\relax #5}}%
\fi
\@xsect{#3}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\if@afterindent}
% \begin{macro}{\@afterindenttrue}
% \begin{macrocode}
\newif\if@afterindent \@afterindenttrue
% \end{macrocode}
% \end{macro}\end{macro}
%
% \begin{macro}{\@afterheading}
% \changes{v1.0v}{1996/08/02}{Removed \cs{global}
% before \cs{@nobreak...}}
%
% This hook is used in setting up custom-built headings in classes.dtx.
%
% \begin{macrocode}
\def\@afterheading{%
\@nobreaktrue
\everypar{%
\if@nobreak
\@nobreakfalse
\clubpenalty \@M
\if@afterindent \else
{\setbox\z@\lastbox}%
\fi
\else
\clubpenalty \@clubpenalty
\everypar{}%
\fi}}
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\@hangfrom}
%
% |\@hangfrom{|\meta{text}|}| : Puts \meta{text} in a box, and makes a
% hanging indentation of the following material up to the first
% |\par|. Should be used in vertical mode.
%
% \changes{v1.0a}{1994/03/07}{(DPC)Extra groups for colour}
% \begin{macrocode}
\def\@hangfrom#1{\setbox\@tempboxa\hbox{{#1}}%
\hangindent \wd\@tempboxa\noindent\box\@tempboxa}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\c@secnumdepth}
% \begin{macro}{\c@tocdepth}
% \begin{macrocode}
\newcount\c@secnumdepth
\newcount\c@tocdepth
% \end{macrocode}
% \end{macro}\end{macro}
%
% \begin{macro}{\secdef}
%
% |\secdef{|\meta{unstarcmds}|}{|\meta{unstarcmds}|}{|%
% \meta{starcmds}|}|\\
% When defining a |\chapter| or |\section| command without using
% |\@startsection|, you can use |\secdef| as follows:
% \begin{enumerate}
% \item |\def\chapter{| \ldots |\secdef|
% |\|\meta{starcmd} |\|\meta{unstarcmd} |}|
% \item |\def\|\meta{starcmd}|[#1]#2{| \ldots |}|
% |%| Command to define |\chapter[|\ldots|]{|\ldots|}|
% \item |\def\|\meta{unstarcmd}|#1{| \ldots |}|
% |%| Command to define |\chapter*{|\ldots|}|
% \end{enumerate}
%
% \begin{macrocode}
\def\secdef#1#2{\@ifstar{#2}{\@dblarg{#1}}}
% \end{macrocode}
% \end{macro}
%
% \subsubsection{Initializations}
% \begin{macro}{\sectionmark}
% \begin{macro}{\subsectionmark}
% \begin{macro}{\subsubsectionmark}
% \begin{macro}{\paragraphmark}
% \begin{macro}{\subparagraphmark}
% \changes{v1.0q}{1995/10/25}{Use \cs{let} not \cs{def} to save space.}
% \begin{macrocode}
\let\sectionmark\@gobble
\let\subsectionmark\@gobble
\let\subsubsectionmark\@gobble
\let\paragraphmark\@gobble
\let\subparagraphmark\@gobble
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macrocode}
\message{contents,}
% \end{macrocode}
%
% \subsection{Table of Contents etc.}
%
% \subsubsection{Convention}
% |\tf@|\meta{foo} = file number for output for table foo.
% The file is opened only if |@filesw| = |true|.
%
% \subsubsection{Commands}
%
%
% A |\l@|\meta{type}|{|\meta{entry}|}{|\meta{page}|}| Macro needs to
% defined by document style for making an entry of type \meta{type}
% in a table of contents, etc. E.g., the document style
% should define |\l@chapter|, |\l@section|, etc.
%
% \textbf{Note:} When the |\protect| command is
% used in the \meta{entry} or \meta{text} of one of the commands
% below, it causes the following control sequence to be written on
% the file without being expanded. The sequence will be expanded
% when the table of contents entry is processed.
%
% \textbf{Surprise:} Inside an |\addcontentsline| or |\addtocontents|
% command argument, the commands: |\index|, |\glossary|, and |\label|
% are no-ops . This could cause a problem if the user puts an
% |\index| or |\label| into one of the commands he writes, or into the
% optional `short version' argument of a |\section| or |\caption|
% command.
%
% \begin{macro}{\@starttoc}
% The |\@starttoc|\marg{ext} command is used to define the commands:\\
% |\tableofcontents|, |\listoffigures|, etc.
%
% For example:
% |\@starttoc{lof}| is used in |\listoffigures|. This command
% reads the |.|\meta{ext} file and sets up to write the new
% |.|\meta{ext} file.
%
% \begin{oldcomments}
% \@starttoc{EXT} ==
% BEGIN
% \begingroup
% \makeatletter
% read file \jobname.EXT
% IF @filesw = true
% THEN open \jobname.EXT as file \tf@EXT
% FI
% @nobreak :=G FALSE %% added 24 May 89
% \endgroup
% END
% \end{oldcomments}
%
% \changes{0.0}{1992/01/14}{(RmS) added \cs{immediate} to \cs{openout}
% as all \cs{write} commands
% are also executed \cs{immediate}}
% \changes{v1.0u}{1996/07/26}{removed \cs{global}
% before \cs{@nobreak...}}
% \begin{macrocode}
\def\@starttoc#1{%
\begingroup
\makeatletter
\@input{\jobname.#1}%
\if@filesw
\expandafter\newwrite\csname tf@#1\endcsname
\immediate\openout \csname tf@#1\endcsname \jobname.#1\relax
\fi
\@nobreakfalse
\endgroup}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\addcontentsline}
% The |\addcontentsline{|\meta{table}|}{|\meta{type}|}{|%
% \meta{entry}|}| command allows the user to add
% his/her own entry to a table of contents, etc. The command adds the
% entry |\contentsline{|\meta{type}|}{|\meta{entry}|}{|\meta{page}|}|
% to the |.|\meta{table} file.
%
% This macro is implemented as an aplication of |\addtocontents|.
% Note that |\thepage| is not expandable during |\protected@write|
% therefore one gets the page number at the time of the |\shipout|.
%
% \changes{v1.0c}{1994/05/20}{Correct setting of \cs{protect}.}
% \changes{v1.0j}{1995/04/23}{Use \cs{contentsline} internally.}
% \changes{v1.0h}{1994/11/04}{Added \cs{protected@write} to
% \cs{addcontentsline}. ASAJ.}
% \begin{macrocode}
\def\addcontentsline#1#2#3{%
\addtocontents{#1}{\protect\contentsline{#2}{#3}{\thepage}}}
% \end{macrocode}
% \end{macro}
%
% \changes{v1.0c}{1994/05/20}{Correct setting of \cs{protect}.}
% \changes{v1.0h}{1994/11/04}{Added \cs{protected@write} to
% \cs{addtocontents}. ASAJ.}
% \begin{macro}{\addtocontents}
%
% The |\addtocontents{|\meta{table}|}{|\meta{text}|}| command
% adds \meta{text} to the |.|\meta{table} file, with no
% page number.
%
% \begin{macrocode}
\long\def\addtocontents#1#2{%
\protected@write\@auxout
{\let\label\@gobble \let\index\@gobble \let\glossary\@gobble}%
{\string\@writefile{#1}{#2}}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\contentsline}
% The |\contentsline{|\meta{type}|}{|\meta{entry}|}{|\meta{page}|}|
% macro produces a \meta{type} entry in a table of contents, etc.
% It will appear in the |.toc| or other file. For example,
% The entry for subsection 1.4.3 in the table of contents for
% example, might be produced by:
%
% \begin{verbatim}
% \contentsline{subsection}
% {\makebox{30pt}[r]{1.4.3} Gnats and Gnus}{22}
% \end{verbatim}
%
% The |\protect| command causes command sequences to be written
% without expanding them.
%
% \begin{macrocode}
\def\contentsline#1{\csname l@#1\endcsname}
% \end{macrocode}
% \end{macro}
%
% |\@dottedtocline{|\meta{level}|}{|\meta{indent}|}{|\meta{numwidth}%
% |}{|\meta{title}|}{|\meta{page}|}|:
% Macro to produce a table of contents line with the following
% parameters:
% \begin{description}
% \item[level] If \meta{level} $>$ |\c@tocdepth|, then no line
% produced.
% \item[indent] Total indentation from the left margin.
% \item[numwidth] Width of box for number if the \meta{title} has a
% |\numberline| command.
% As of 25 Jan 1988, this is also the amount of extra
% indentation added to second and later lines of a
% multiple line entry.
% \item[title] Contents of entry.
% \item[page] Page number.
% \end{description}
%
% Uses the following parameters, which must be set by the document
% style. They should be defined with |\def|'s.
% \begin{description}
% \item[|\@pnumwidth|] Width of box in which page number is set.
% \item[|\@tocrmarg|] Right margin indentation for all but last line
% of multiple-line entries.
% \item[|\@dotsep|] Separation between dots, in mu units.
% Should be |\def|'d to a number like 2 or 1.7
% \end{description}
%
% \begin{macro}{\@dottedtocline}
% \changes{LaTeX2.09}{1991/09/29}
% {(RmS) added \cs{reset@font} for page number}
% \changes{v1.0e}{1994/05/25}{Put braces around argument 4
% (the actual toc entry) to avoid font (and possibly other)
% changes leaking out to the leaders.}
% \changes{v1.0g}{1994/10/18}{Added \cs{normalcolor} for page number}
% \changes{v1.0z}{1996/12/20}{Added \cs{nobreak} for latex/2343}
% \begin{macrocode}
\def\@dottedtocline#1#2#3#4#5{%
\ifnum #1>\c@tocdepth \else
\vskip \z@ \@plus.2\p@
{\leftskip #2\relax \rightskip \@tocrmarg \parfillskip -\rightskip
\parindent #2\relax\@afterindenttrue
\interlinepenalty\@M
\leavevmode
\@tempdima #3\relax
% \end{macrocode}
% \changes{v1.0z}{1996/12/20}{Added \cs{nobreak} for latex/2343}
% \begin{macrocode}
\advance\leftskip \@tempdima \null\nobreak\hskip -\leftskip
{#4}\nobreak
\leaders\hbox{$\m@th
% \end{macrocode}
% If a document uses fonts other than computer modern, the use of a
% dot from math can be very disturbing despite the fact that this
% might be the only place in a document that then uses computer
% modern.
% Therefore we surround the dot with an |\hbox| to escape to the
% surrounding text font.
% \changes{v1.0k}{1995/04/25}{Added \cs{hbox} around dots.}
% \changes{v1.0l}{1995/05/02}{Don't reset to \cs{rmfamily}}
% \begin{macrocode}
\mkern \@dotsep mu\hbox{.}\mkern \@dotsep
mu$}\hfill
\nobreak
\hb@xt@\@pnumwidth{\hfil\normalfont \normalcolor #5}%
\par}%
\fi}
% \end{macrocode}
% \end{macro}
%
% \textbf{Note:} |\nobreak|'s added 7 Jan 86 to prevent bad line break
% that left the page number dangling by itself at left edge of a new
% line.
%
% Changed 25 Jan 88 to use |\leftskip| instead of |\hangindent| so
% leaders of multiple-line contents entries would line up properly.
% \begin{macro}{\numberline}
% |\numberline{|\meta{number}|}|: For use in a |\contentsline| command.
% It puts \meta{number} flushleft in a box of width |\@tempdima|
% (Before 25
% Jan 88 change, it also added |\@tempdima| to the hanging
% indentation.)
%
% \begin{macrocode}
\def\numberline#1{\hb@xt@\@tempdima{#1\hfil}}
%</2ekernel>
% \end{macrocode}
% \end{macro}
%
% \Finale
%
|
