%% @metafontfile{
%% filename="wncyb10.mf",
%% version="2.2",
%% date="04-JAN-1995",
%% filetype="Metafont: parameter",
%% copyright="Copyright (C) Humanities and Arts Computing Center,
%% University of Washington;
%% all rights reserved. Copying of this file is
%% authorized only if either:
%% (1) you make absolutely no changes to your copy
%% including name; OR
%% (2) if you do make changes, you first rename it to some
%% other name.",
%% author="American Mathematical Society",
%% address="American Mathematical Society,
%% Technical Support, Electronic Products and Services,
%% P. O. Box 6248,
%% Providence, RI 02940,
%% USA",
%% telephone="401-455-4080 or (in the USA) 800-321-4AMS",
%% email="Internet: [email protected]",
%% codetable="ISO/ASCII",
%% checksum = "41246 147 848 7146"
%% keywords="amsfonts, tex, metafont , cyrillic ",
%% abstract="This is the parameter file for use with
%% wncyb10, the bold cyrillic font in AMSFonts 2.2."
%% docstring = "The checksum field above contains a CRC-16
%% checksum as the first value, followed by the
%% equivalent of the standard UNIX wc (word
%% count) utility output of lines, words, and
%% characters. This is produced by Robert
%% Solovay's checksum utility.",
%% }
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% This is WNCYB10, Washington Computer Modern Cyrillic Bold 10 point,
% which is based on CMBX10.MF (Computer Modern Bold Extended Roman 10 point)
% and on CMCSC10.MF (Computer Modern Roman Caps and Small Caps 10 point)
%
% (C) 1989 Humanities and Arts Computing Center, University of Washington
if unknown cmbase: input cmbase fi
font_identifier:="WNCYB V2.2"; font_size 10pt#;
u#:=23/36pt#; % unit width
width_adj#:=11/36pt#; % width adjustment for certain characters
serif_fit#:=0pt#; % extra sidebar near lowercase serifs
cap_serif_fit#:=7/36pt#; % extra sidebar near uppercase serifs
letter_fit#:=0pt#; % extra space added to all sidebars
body_height#:=270/36pt#; % height of tallest characters
asc_height#:=250/36pt#; % height of lowercase ascenders
cap_height#:=247/36pt#; % height of caps
fig_height#:=232/36pt#; % height of numerals
x_height#:=160/36pt#; % height of lowercase without ascenders
math_axis#:=90/36pt#; % axis of symmetry for math symbols
bar_height#:=85/36pt#; % height of crossbar in lowercase e
comma_depth#:=70/36pt#; % depth of comma below baseline
desc_depth#:=70/36pt#; % depth of lowercase descenders
crisp#:=0pt#; % diameter of serif corners
tiny#:=13/36pt#; % diameter of rounded corners
fine#:=10/36pt#; % diameter of sharply rounded corners
thin_join#:=10/36pt#; % width of extrafine details
hair#:=17/36pt#; % lowercase hairline breadth
stem#:=41/36pt#; % lowercase stem breadth
curve#:=46/36pt#; % lowercase curve breadth
ess#:=38/36pt#; % breadth in middle of lowercase s
flare#:=45/36pt#; % diameter of bulbs or breadth of terminals
dot_size#:=56/36pt#; % diameter of dots
cap_hair#:=19/36pt#; % uppercase hairline breadth
cap_stem#:=51/36pt#; % uppercase stem breadth
cap_curve#:=55/36pt#; % uppercase curve breadth
cap_ess#:=53/36pt#; % breadth in middle of uppercase s
rule_thickness#:=.6pt#; % thickness of lines in math symbols
dish#:=1/36pt#; % amount erased at top or bottom of serifs
bracket#:=10/36pt#; % vertical distance from serif base to tangent
jut#:=25/36pt#; % protrusion of lowercase serifs
cap_jut#:=39/36pt#; % protrusion of uppercase serifs
beak_jut#:=11/36pt#; % horizontal protrusion of beak serifs
beak#:=70/36pt#; % vertical protrusion of beak serifs
vair#:=13/36pt#; % vertical diameter of hairlines
notch_cut#:=10pt#; % maximum breadth above or below notches
bar#:=17/36pt#; % lowercase bar thickness
slab#:=17/36pt#; % serif and arm thickness
cap_bar#:=17/36pt#; % uppercase bar thickness
cap_band#:=17/36pt#; % uppercase thickness above/below lobes
cap_notch_cut#:=10pt#; % max breadth above/below uppercase notches
serif_drop#:=3/36pt#; % vertical drop of sloped serifs
stem_corr#:=2/36pt#; % for small refinements of stem breadth
vair_corr#:=1.5/36pt#; % for small refinements of hairline height
apex_corr#:=0pt#; % extra width at diagonal junctions
o#:=4/36pt#; % amount of overshoot for curves
apex_o#:=3/36pt#; % amount of overshoot for diagonal junctions
slant:=0; % tilt ratio $(^Delta x/^Delta y)$
fudge:=1; % factor applied to weights of heavy characters
math_spread:=.5; % extra openness of math symbols
superness:=8/11; % parameter for superellipses
superpull:=1/8; % extra openness inside bowls
beak_darkness:=.4; % fraction of triangle inside beak serifs
ligs:=2; % level of ligatures to be included
square_dots:=false; % should dots be square?
hefty:=false; % should we try hard not to be overweight?
serifs:=true; % should serifs and bulbs be attached?
monospace:=false; % should all characters have the same width?
variant_g:=false; % should an italic-style g be used?
low_asterisk:=false; % should the asterisk be centered at the axis?
math_fitting:=false; % should math-mode spacing be used?
lower.u#:=16/36pt#; % unit width
lower.width_adj#:=7/36pt#; % width adjustment for certain characters
lower.cap_serif_fit#:=4/36pt#; % extra sidebar near uppercase serifs
lower.letter_fit#:=0/36pt#; % extra space added to all sidebars
lower.body_height#:=175/36pt#; % height of tallest characters
lower.cap_height#:=160/36pt#; % height of caps
lower.x_height#:=100/36pt#; % height of lowercase without ascenders
lower.bar_height#:=55/36pt#; % height of crossbar in lowercase e
lower.comma_depth#:=44/36pt#; % depth of comma below baseline
lower.flare#:=32/36pt#; % diameter of bulbs or breadth of terminals
lower.cap_hair#:=17/36pt#; % uppercase hairline breadth %might be reduced to 7
lower.stem#:=41/36pt#; % lowercase stem breadth
lower.cap_stem#:=41/36pt#; % uppercase stem breadth
lower.cap_curve#:=46/36pt#; % uppercase curve breadth
lower.cap_ess#:=38/36pt#; % breadth in middle of uppercase s
lower.cap_jut#:=28/36pt#; % protrusion of uppercase serifs
lower.beak_jut#:=11/36pt#; % horizontal protrusion of beak serifs
lower.beak#:=44/36pt#; % vertical protrusion of beak serifs
lower.slab#:=17/36pt#; % serif and arm thickness
lower.cap_bar#:=17/36pt#; % uppercase bar thickness
lower.cap_band#:=17/36pt#; % uppercase thickness above/below lobes
lower.cap_notch_cut#:=10pt#; % max breadth above/below uppercase notches
lower.o#:=4/36pt#; % amount of overshoot for curves
lower.apex_o#:=3/36pt#; % amount of overshoot for diagonal junctions
lower.fudge:=1; % factor applied to weights of heavy characters
generate cyrfont % switch to the driver file
|
