%% @metafontfile{
%% filename="cmcsc9.mf",
%% version="2.2",
%% date="04-JAN-1995",
%% filetype="Metafont: parameter",
%% copyright="Copyright (C) American Mathematical Society,
%% all rights reserved. Copying of this file is
%% authorized only if either:
%% (1) you make absolutely no changes to your copy
%% including name; OR
%% (2) if you do make changes, you first rename it to some
%% other name.",
%% author="American Mathematical Society",
%% address="American Mathematical Society,
%% Technical Support, Electronic Products and Services,
%% P. O. Box 6248,
%% Providence, RI 02940,
%% USA",
%% telephone="401-455-4080 or (in the USA) 800-321-4AMS",
%% email="Internet: [email protected]",
%% codetable="ISO/ASCII",
%% checksum = "36892 142 805 7430"
%% keywords="amsfonts, tex, metafont ",
%% abstract="This is the parameter file for use with
%% cmcsc9, in AMSFonts 2.2."
%% docstring = "The checksum field above contains a CRC-16
%% checksum as the first value, followed by the
%% equivalent of the standard UNIX wc (word
%% count) utility output of lines, words, and
%% characters. This is produced by Robert
%% Solovay's checksum utility.",
%% }
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Computer Modern Roman Caps and Small Caps 9 point; created at AMS
if unknown cmbase: input cmbase fi
font_identifier:="CMCSC V2.2"; font_size 9pt#;
u#:=19/36pt#; % unit width
width_adj#:=0pt#; % width adjustment for certain characters
serif_fit#:=0pt#; % extra sidebar near lowercase serifs
cap_serif_fit#:=4.6/36pt#; % extra sidebar near uppercase serifs
letter_fit#:=3.5/36pt#; % extra space added to all sidebars
body_height#:=243/36pt#; % height of tallest characters
asc_height#:=225/36pt#; % height of lowercase ascenders
cap_height#:=221.4/36pt#; % height of caps
fig_height#:=208.8/36pt#; % height of numerals
x_height#:=139.5/36pt#; % height of lowercase without ascenders
math_axis#:=81/36pt#; % axis of symmetry for math symbols
bar_height#:=78.3/36pt#; % height of crossbar in lowercase e
comma_depth#:=63/36pt#; % depth of comma below baseline
desc_depth#:=63/36pt#; % depth of lowercase descenders
crisp#:=0pt#; % diameter of serif corners
tiny#:=8/36pt#; % diameter of rounded corners
fine#:=7/36pt#; % diameter of sharply rounded corners
thin_join#:=7/36pt#; % width of extrafine details
hair#:=9/36pt#; % lowercase hairline breadth
stem#:=24/36pt#; % lowercase stem breadth
curve#:=28/36pt#; % lowercase curve breadth
ess#:=25/36pt#; % breadth in middle of lowercase s
flare#:=30/36pt#; % diameter of bulbs or breadth of terminals
dot_size#:=35/36pt#; % diameter of dots
cap_hair#:=10/36pt#; % uppercase hairline breadth
cap_stem#:=29/36pt#; % uppercase stem breadth
cap_curve#:=33/36pt#; % uppercase curve breadth
cap_ess#:=31/36pt#; % breadth in middle of uppercase s
rule_thickness#:=.38pt#; % thickness of lines in math symbols
dish#:=1/36pt#; % amount erased at top or bottom of serifs
bracket#:=18/36pt#; % vertical distance from serif base to tangent
jut#:=25/36pt#; % protrusion of lowercase serifs
cap_jut#:=33/36pt#; % protrusion of uppercase serifs
beak_jut#:=9.2/36pt#; % horizontal protrusion of beak serifs
beak#:=63/36pt#; % vertical protrusion of beak serifs
vair#:=8/36pt#; % vertical diameter of hairlines
notch_cut#:=9pt#; % maximum breadth above or below notches
bar#:=10/36pt#; % lowercase bar thickness
slab#:=10/36pt#; % serif and arm thickness
cap_bar#:=10/36pt#; % uppercase bar thickness
cap_band#:=10/36pt#; % uppercase thickness above/below lobes
cap_notch_cut#:=9pt#; % max breadth above/below uppercase notches
serif_drop#:=3.6/36pt#; % vertical drop of sloped serifs
stem_corr#:=1/36pt#; % for small refinements of stem breadth
vair_corr#:=1/36pt#; % for small refinements of hairline height
apex_corr#:=0pt#; % extra width at diagonal junctions
o#:=7/36pt#; % amount of overshoot for curves
apex_o#:=7/36pt#; % amount of overshoot for diagonal junctions
slant:=0; % tilt ratio $(\Delta x/\Delta y)$
fudge:=1; % factor applied to weights of heavy characters
math_spread:=.2; % extra openness of math symbols
superness:=1/sqrt2; % parameter for superellipses
superpull:=1/6; % extra openness inside bowls
beak_darkness:=11/30; % fraction of triangle inside beak serifs
ligs:=1; % level of ligatures to be included
square_dots:=false; % should dots be square?
hefty:=false; % should we try hard not to be overweight?
serifs:=true; % should serifs and bulbs be attached?
monospace:=false; % should all characters have the same width?
variant_g:=false; % should an italic-style g be used?
low_asterisk:=false; % should the asterisk be centered at the axis?
math_fitting:=false; % should math-mode spacing be used?
% now come replacements used to set the lowercase caps
lower.u#:=14.5/36pt#; % unit width
lower.width_adj#:=0pt#; % width adjustment for certain characters
lower.cap_serif_fit#:=3.4/36pt#; % extra sidebar near uppercase serifs
lower.letter_fit#:=3.5/36pt#; % extra space added to all sidebars
lower.body_height#:=173/36pt#; % height of tallest characters
lower.cap_height#:=170.4/36pt#; % height of caps
lower.x_height#:=100.5/36pt#; % height of lowercase without ascenders
lower.bar_height#:=56.3/36pt#; % height of crossbar in lowercase e
lower.comma_depth#:=45/36pt#; % depth of comma below baseline
lower.flare#:=22/36pt#; % diameter of bulbs or breadth of terminals
lower.cap_hair#:=8.6/36pt#; % uppercase hairline breadth
lower.stem#:=19/36pt#; % lowercase stem breadth
lower.cap_stem#:=23.5/36pt#; % uppercase stem breadth
lower.cap_curve#:=28/36pt#; % uppercase curve breadth
lower.cap_ess#:=24/36pt#; % breadth in middle of uppercase s
lower.cap_jut#:=23/36pt#; % protrusion of uppercase serifs
lower.beak_jut#:=6.2/36pt#; % horizontal protrusion of beak serifs
lower.beak#:=45/36pt#; % vertical protrusion of beak serifs
lower.slab#:=8.6/36pt#; % serif and arm thickness
lower.cap_bar#:=8.6/36pt#; % uppercase bar thickness
lower.cap_band#:=8.6/36pt#; % uppercase thickness above/below lobes
lower.cap_notch_cut#:=9pt#; % max breadth above/below uppercase notches
lower.o#:=4.5/36pt#; % amount of overshoot for curves
lower.apex_o#:=3/36pt#; % amount of overshoot for diagonal junctions
lower.fudge:=1; % factor applied to weights of heavy characters
generate csc % switch to the driver file
|
