Plan 9 from Bell Labs’s /usr/web/sources/contrib/quanstro/src/vga/trio64.c

Copyright © 2021 Plan 9 Foundation.
Distributed under the MIT License.
Download the Plan 9 distribution.


#include <u.h>
#include <libc.h>
#include <bio.h>

#include "pci.h"
#include "vga.h"

/*
 * S3 Trio64.
 */
static void
snarf(Vga* vga, Ctlr* ctlr)
{
	int i;

	/*
	 * The Trio has some extra sequencer registers which
	 * need to be unlocked for access.
	 */
	vgaxo(Seqx, 0x08, 0x06);
	for(i = 0x08; i < 0x19; i++)
		vga->sequencer[i] = vgaxi(Seqx, i);
	vga->crt[0x2D] = vgaxi(Crtx, 0x2D);
	vga->crt[0x2E] = vgaxi(Crtx, 0x2E);
	vga->crt[0x2F] = vgaxi(Crtx, 0x2F);

	s3generic.snarf(vga, ctlr);
	ctlr->flag |= Fsnarf;
}

static void
options(Vga*, Ctlr* ctlr)
{
	ctlr->flag |= Hlinear|Hpclk2x8|Henhanced|Foptions;
}

void
trio64clock(Vga* vga, Ctlr* ctlr)
{
	int d;
	ulong f, fmax, fmin, n, m, r;
	double trouble;

	/*
	 * The max value of R, M, N, and the speed rating of the part vary
	 * between parts and are passed to this routine in r[1] and f[1].
	 *			R	    F
	 *	Trio64		3	135000000
	 *	ViRGE		3	135000000
	 *	ViRGE/[DG]X	4	170000000
	 *	ViRGE/GX2	4	170000000
	 *	ViRGE/VX	4	220000000
	 */

	/*
	 * The PLL frequency is defined by the following equation:
	 *		   (M+2)
	 *	Fout = ------------- x Fref
	 *		(N+2) x 2**R
	 * where M, N and R have the following contraints:
	 * 1)		   (M+2) x Fref
	 *    vga->f[1] <= ------------ <= vga->f[1]*2
	 *		       (N+2)
	 * 2) 1 <= M <= vga->m[1] (usually 127)
	 * 3) 1 <= N <= vga->n[1] (usually 31)
	 * 4) 0 <= R <= vga->r[1]
	 *
	 * First determine R:
	 *	vga->f[1] < 2**R x Fout <= vga->f[1]*2
	 */
	for(r = 0; r <= vga->r[1]; r++){
		f = vga->f[0]*(1<<r);
		if(vga->f[1] < f && f <= vga->f[1]*2)
			vga->r[0] = r;
	}
	if(vga->r[0] > vga->r[1])
		error("%s: pclk %lud out of range\n", ctlr->name, vga->f[0]);

	/*
	 * Now find the closest match for M and N.
	 */
	vga->d[0] = vga->f[0]+1;
	for(n = 1; n <= vga->n[1]; n++){
		trouble = vga->f[0]*(n+2)*(1<<vga->r[0]);
		trouble /= RefFreq;
		m = (trouble+0.5) - 2;
		if(m > vga->m[1])
			continue;

		trouble = (m+2)*RefFreq;
		trouble /= (n+2)*(1<<vga->r[0]);
		f = trouble+0.5;

		d = vga->f[0] - f;
		if(d < 0)
			d = -d;
		if(d <= vga->d[0]){
			vga->m[0] = m;
			vga->n[0] = n;
			vga->d[0] = d;
		}
	}

	trouble = vga->f[0]*1.005;
	fmax = trouble;
	trouble = vga->f[0]*0.995;
	fmin = trouble;
	trouble = (vga->m[0]+2)*RefFreq;
	trouble /= (vga->n[0]+2)*(1<<vga->r[0]);
	f = trouble+0.5;
	if(fmin >= f || f >= fmax)
		error("%s: pclk %lud out of range\n", ctlr->name, vga->f[0]);
}

static void
init(Vga* vga, Ctlr* ctlr)
{
	ulong pclk, x;

	s3generic.init(vga, ctlr);

	/*
	 * Clock bits. If the desired video clock is
	 * one of the two standard VGA clocks it can just be
	 * set using bits <3:2> of vga->misc, otherwise we
	 * need to programme the DCLK PLL.
	 */
	if(vga->mode->z > 8)
		error("depth %d not supported\n", vga->mode->z);

	if(vga->f[0] == 0)
		vga->f[0] = vga->mode->frequency;
	vga->misc &= ~0x0C;
	if(vga->f[0] == VgaFreq0){
		/* nothing to do */;
	}
	else if(vga->f[0] == VgaFreq1)
		vga->misc |= 0x04;
	else{
		/*
		 * Part comes in -135MHz speed grade. In 8-bit mode
		 * the maximum DCLK is 80MHz. In 2x8-bit mode the maximum
		 * DCLK is 135MHz using the internal clock doubler.
		 */
		if((ctlr->flag & Hpclk2x8) && vga->mode->z == 8){
			pclk = 135000000;
			if(vga->f[0] > 80000000)
				ctlr->flag |= Upclk2x8;
		}
		else
			pclk = 80000000;
		if(vga->f[0] > pclk)
			error("%s: invalid pclk - %lud\n",
				ctlr->name, vga->f[0]);

		vga->f[1] = 135000000;
		vga->r[1] = 3;
		vga->n[1] = 31;
		vga->m[1] = 127;
		trio64clock(vga, ctlr);
		vga->sequencer[0x12] = (vga->r[0]<<5)|vga->n[0];
		vga->sequencer[0x13] = vga->m[0];
		vga->misc |= 0x0C;
	}

	/*
	 * Internal clock generator.
	 */
	vga->sequencer[0x15] &= ~0x31;
	vga->sequencer[0x15] |= 0x02;
	vga->sequencer[0x18] &= ~0x80;
	vga->crt[0x67] &= ~0xF2;
	if(ctlr->flag & Upclk2x8){
		vga->sequencer[0x15] |= 0x10;
		vga->sequencer[0x18] |= 0x80;
		/*
		 * There's a little strip of the border
		 * appears on the left in resolutions
		 * 1280 and above if the 0x02 bit isn't
		 * set (when it appears on the right...).
		 */
		vga->crt[0x67] |= 0x10;
	}

	/*
	 * VLB address latch delay.
	 */
	if((vga->crt[0x36] & 0x03) == 0x01)
		vga->crt[0x58] &= ~0x08;

	/*
	 * Start display FIFO fetch.
	 */
	x = vga->crt[0]-5;
	vga->crt[0x3B] = x;
	if(x & 0x100)
		vga->crt[0x5D] |= 0x40;

	/*
	 * Display memory access control.
	 * Calculation of the M-parameter (Crt54) is
	 * memory-system and dot-clock dependent, the
	 * values below are guesses from dumping
	 * registers.
	 */
	vga->crt[0x60] = 0xFF;
	if(vga->mode->x <= 800)
		vga->crt[0x54] = 0xE8;
	else if(vga->mode->x <= 1024)
		vga->crt[0x54] = 0xA8;
	else
		vga->crt[0x54] = 0x00/*0x48*/;

	ctlr->flag |= Finit;
}

static void
load(Vga* vga, Ctlr* ctlr)
{
	ushort advfunc;

	s3generic.load(vga, ctlr);
	vgaxo(Crtx, 0x60, vga->crt[0x60]);
	vgaxo(Crtx, 0x67, vga->crt[0x67]);

	/*
	 * Load the PLL registers if necessary.
	 * Not sure if the variable-delay method of setting the
	 * PLL will work without a write here to vga->misc,
	 * so use the immediate-load method by toggling bit 5
	 * of Seq15 if necessary.
	 */
	vgaxo(Seqx, 0x12, vga->sequencer[0x12]);
	vgaxo(Seqx, 0x13, vga->sequencer[0x13]);
	if((vga->misc & 0x0C) == 0x0C)
		vgaxo(Seqx, 0x15, vga->sequencer[0x15]|0x20);
	vgaxo(Seqx, 0x15, vga->sequencer[0x15]);
	vgaxo(Seqx, 0x18, vga->sequencer[0x18]);

	advfunc = 0x0000;
	if(ctlr->flag & Uenhanced)
		advfunc = 0x0001;
	outportw(0x4AE8, advfunc);
}

static void
dump(Vga* vga, Ctlr* ctlr)
{
	int i;
	ulong dclk, m, n, r;

	s3generic.dump(vga, ctlr);

	printitem(ctlr->name, "Seq08");
	for(i = 0x08; i < 0x19; i++)
		printreg(vga->sequencer[i]);

	printitem(ctlr->name, "Crt2D");
	printreg(vga->crt[0x2D]);
	printreg(vga->crt[0x2E]);
	printreg(vga->crt[0x2F]);

	n = vga->sequencer[0x12] & 0x1F;
	r = (vga->sequencer[0x12]>>5) & 0x03;
	m = vga->sequencer[0x13] & 0x7F;
	dclk = (m+2)*RefFreq;
	dclk /= (n+2)*(1<<r);
	printitem(ctlr->name, "dclk m n r");
	Bprint(&stdout, "%9ld %8ld       - %8ld %8ld\n", dclk, m, n, r);
}

Ctlr trio64 = {
	"trio64",			/* name */
	snarf,				/* snarf */
	options,			/* options */
	init,				/* init */
	load,				/* load */
	dump,				/* dump */
};

Bell Labs OSI certified Powered by Plan 9

(Return to Plan 9 Home Page)

Copyright © 2021 Plan 9 Foundation. All Rights Reserved.
Comments to [email protected].