Plan 9 from Bell Labs’s /usr/web/sources/contrib/john/planb.txt

Copyright © 2021 Plan 9 Foundation.
Distributed under the MIT License.
Download the Plan 9 distribution.


Installing Plan B on Qemu
John Floren, 2007-06-19
--------------------------
This document describes my experiences installing Plan B on Qemu, specifically under Windows Vista. Note that, while this will let you run omero and other Plan B applications, not everything seems to be perfect. Most notably, /who and /mail are a little incorrect.

1) Install a standalone Plan 9 terminal under Qemu. Just use fossil, no need for venti.

2) From your new terminal, download the Plan B tarball from http://lsub.org/ls/export/planb4e.tgz using hget. Save it to $home.

3) Run "con /srv/fscons" and type "srv instfs", then hit ^\ and type q to quit.

4) "mount -c /srv/instfs /n/inst" We do this because you can't uncompress things directly into /

5) "cd /n/inst && tar xzvf $home/planb4e.tgz"

6) In my case, the omero that was included in the tarball wanted special fonts that I didn't have, so I recompiled it from source, which can use Plan 9 fonts. Do the following:
	9fs sources
	mkdir $home/omero
	cp /n/sources/contrib/nemo/sys/src/cmd/omero/* $home/omero/
	cd $home/omero
	mk
	cp 8.out /bin/omero

6) Okay, here's where I'm not quite sure about the procedure. You need to specify where your root comes from, but it's unclear where the config file goes. I created /lib/ndb/vol/vols with the following line:
	/srv/vfossil main/active / /
To be safe, I copied that file to /lib/ndb/vol/volumes, /lib/ndb/volumes/vols, and /lib/ndb/volumes/volumes. Only one of these files is correct, but I'm not certain which it is--haven't bothered to test.

7) Run "cd $home/tmp && fossil/conf /dev/sdC0/fossil > fossil.conf" to get a copy of your current fossil config.

8) Edit the fossil.conf file to look similar to mine:
	fsys main config /dev/sdC0/fossil
	fsys main open -AWP -V -c 1500
	srv bfs
	srv vfossil
	fsys main
	srv -p cons
	srv fossil
and write the new configure file with the command "fossil/conf -w /dev/sdC0/fossil $home/tmp/fossil.conf"

9) Run "9fat:" and edit /n/9fat/plan9.ini to look similar to mine (you may need to change some options):
	bootfile=sdC0!9fat!9pcf
	bootargs=local!#S/sdC0/fossil
	bootdisk=local!#S/sdC0/fossil
	init=/386/bin/bns
	planb=yes
	sysname=zaphod	#change this to match your config
	fs=127.0.0.1
	auth=127.0.0.1
	*nomp=1
	*nodumpstack=1
	partition=new
	dmamode=ask
	mouseport=ps1
	monitor=xga
	vgasize=1280x1024x8

10) Go ahead and reboot, selecting root from local and user "glenda". You should get a standard rio screen, but if you sweep out a window and run "omero", everything should work properly.

That's all I know! If any of these instructions don't work properly, contact me at slawmaster AT gmail.com.

Bell Labs OSI certified Powered by Plan 9

(Return to Plan 9 Home Page)

Copyright © 2021 Plan 9 Foundation. All Rights Reserved.
Comments to [email protected].