#
# Makefile to build perl on Windows NT using Microsoft NMAKE.
# Supported compilers:
# Visual C++ 2.0 through 6.0 (and possibly newer versions)
# MS Platform SDK 64-bit compiler and tools **experimental**
#
# This is set up to build a perl.exe that runs off a shared library
# (perl58.dll). Also makes individual DLLs for the XS extensions.
#
##
## Make sure you read README.win32 *before* you mess with anything here!
##
##
## Build configuration. Edit the values below to suit your needs.
##
#
# Set these to wherever you want "nmake install" to put your
# newly built perl.
#
INST_DRV = c:
INST_TOP = $(INST_DRV)\perl
#
# Comment this out if you DON'T want your perl installation to be versioned.
# This means that the new installation will overwrite any files from the
# old installation at the same INST_TOP location. Leaving it enabled is
# the safest route, as perl adds the extra version directory to all the
# locations it installs files to. If you disable it, an alternative
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
#INST_VER = \5.8.0
#
# Comment this out if you DON'T want your perl installation to have
# architecture specific components. This means that architecture-
# specific files will be installed along with the architecture-neutral
# files. Leaving it enabled is safer and more flexible, in case you
# want to build multiple flavors of perl and install them together in
# the same location. Commenting it out gives you a simpler
# installation that is easier to understand for beginners.
#
#INST_ARCH = \$(ARCHNAME)
#
# uncomment to enable multiple interpreters. This is need for fork()
# emulation and for thread support.
#
USE_MULTI = define
#
# Beginnings of interpreter cloning/threads; now reasonably complete.
# This should be enabled to get the fork() emulation. This needs
# USE_MULTI as well.
#
USE_ITHREADS = define
#
# uncomment to enable the implicit "host" layer for all system calls
# made by perl. This needs USE_MULTI above. This is also needed to
# get fork().
#
USE_IMP_SYS = define
#
# Comment out next assign to disable perl's I/O subsystem and use compiler's
# stdio for IO - depending on your compiler vendor and run time library you may
# then get a number of fails from make test i.e. bugs - complain to them not us ;-).
# You will also be unable to take full advantage of perl5.8's support for multiple
# encodings and may see lower IO performance. You have been warned.
USE_PERLIO = define
#
# WARNING! This option is deprecated and will eventually go away (enable
# USE_ITHREADS instead).
#
# uncomment to enable threads-capabilities. This is incompatible with
# USE_ITHREADS, and is only here for people who may have come to rely
# on the experimental Thread support that was in 5.005.
#
#USE_5005THREADS = define
#
# uncomment one of the following lines if you are using either
# Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)
#
#CCTYPE = MSVC20
#CCTYPE = MSVC60
#
# uncomment next line if you want debug version of perl (big,slow)
# If not enabled, we automatically try to use maximum optimization
# with all compilers that are known to have a working optimizer.
#
#CFG = Debug
#
# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
# It has patches that fix known bugs in older versions of MSVCRT.DLL.
# This currently requires VC 5.0 with Service Pack 3 or later.
# Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
# and follow the directions in the package to install.
#
# Not recommended if you have VC 6.x and you're not running Windows 9x.
#
#USE_PERLCRT = define
#
# uncomment to enable linking with setargv.obj under the Visual C
# compiler. Setting this options enables perl to expand wildcards in
# arguments, but it may be harder to use alternate methods like
# File::DosGlob that are more powerful. This option is supported only with
# Visual C.
#
#USE_SETARGV = define
#
# if you have the source for des_fcrypt(), uncomment this and make sure the
# file exists (see README.win32). File should be located in the same
# directory as this file.
#
#CRYPT_SRC = fcrypt.c
#
# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
# library, uncomment this, and make sure the library exists (see README.win32)
# Specify the full pathname of the library.
#
#CRYPT_LIB = fcrypt.lib
#
# set this if you wish to use perl's malloc
# WARNING: Turning this on/off WILL break binary compatibility with extensions
# you may have compiled with/without it. Be prepared to recompile all
# extensions if you change the default. Currently, this cannot be enabled
# if you ask for USE_IMP_SYS above.
#
#PERL_MALLOC = define
#
# set the install locations of the compiler include/libraries
# Running VCVARS32.BAT is *required* when using Visual C.
# Some versions of Visual C don't define MSVCDIR in the environment,
# so you may have to set CCHOME explicitly (spaces in the path name should
# not be quoted)
#
#CCHOME = f:\msvc20
CCHOME = $(MSVCDIR)
CCINCDIR = $(CCHOME)\include
CCLIBDIR = $(CCHOME)\lib
#
# Additional compiler flags can be specified here.
#
#
# This should normally be disabled. Adding -DPERL_POLLUTE enables support
# for old symbols by default, at the expense of extreme pollution. You most
# probably just want to build modules that won't compile with
# perl Makefile.PL POLLUTE=1
# instead of enabling this. Please report such modules to the respective
# authors.
#
#BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
#
# This should normally be disabled. Enabling it will disable the File::Glob
# implementation of CORE::glob.
#
#BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
#
# This should normally be disabled. Enabling it causes perl to read scripts
# in text mode (which is the 5.005 behavior) and will break ByteLoader.
#BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
#
# specify semicolon-separated list of extra directories that modules will
# look for libraries (spaces in path names need not be quoted)
#
EXTRALIBDIRS =
#
# set this to your email address (perl will guess a value from
# from your loginname and your hostname, which may not be right)
#
#EMAIL =
##
## Build configuration ends.
##
##################### CHANGE THESE ONLY IF YOU MUST #####################
!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
D_CRYPT = undef
!ELSE
D_CRYPT = define
CRYPT_FLAG = -DHAVE_DES_FCRYPT
!ENDIF
!IF "$(PERL_MALLOC)" == ""
PERL_MALLOC = undef
!ENDIF
!IF "$(USE_5005THREADS)" == ""
USE_5005THREADS = undef
!ENDIF
!IF "$(USE_5005THREADS)" == "define"
USE_ITHREADS = undef
!ENDIF
!IF "$(USE_IMP_SYS)" == "define"
PERL_MALLOC = undef
!ENDIF
!IF "$(USE_MULTI)" == ""
USE_MULTI = undef
!ENDIF
!IF "$(USE_ITHREADS)" == ""
USE_ITHREADS = undef
!ENDIF
!IF "$(USE_IMP_SYS)" == ""
USE_IMP_SYS = undef
!ENDIF
!IF "$(USE_PERLIO)" == ""
USE_PERLIO = undef
!ENDIF
!IF "$(USE_PERLCRT)" == ""
USE_PERLCRT = undef
!ENDIF
!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)" == "defineundefundef"
USE_MULTI = define
!ENDIF
!IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
USE_MULTI = define
USE_5005THREADS = undef
!ENDIF
!IF "$(USE_MULTI)$(USE_5005THREADS)" != "undefundef"
BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
!ENDIF
!IF "$(USE_IMP_SYS)" != "undef"
BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
!ENDIF
!IF "$(PROCESSOR_ARCHITECTURE)" == ""
PROCESSOR_ARCHITECTURE = x86
!ENDIF
!IF "$(WIN64)" == ""
!IF "$(PROCESSOR_ARCHITEW6432)" != ""
PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
WIN64 = define
!ELSE
!IF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
WIN64 = define
!ELSE
WIN64 = undef
!ENDIF
!ENDIF
!ENDIF
!IF "$(USE_5005THREADS)" == "define"
ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
!ELSE
!IF "$(USE_MULTI)" == "define"
ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
!ELSE
!IF "$(USE_PERLIO)" == "define"
ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
!ELSE
ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
!ENDIF
!ENDIF
!ENDIF
!IF "$(USE_PERLIO)" == "define"
BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
!ENDIF
!IF "$(USE_ITHREADS)" == "define"
ARCHNAME = $(ARCHNAME)-thread
!ENDIF
# Visual Studio 98 specific
!IF "$(CCTYPE)" == "MSVC60"
# VC 6.0 can load the socket dll on demand. Makes the test suite
# run in about 10% less time.
DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
!ENDIF
ARCHDIR = ..\lib\$(ARCHNAME)
COREDIR = ..\lib\CORE
AUTODIR = ..\lib\auto
LIBDIR = ..\lib
EXTDIR = ..\ext
PODDIR = ..\pod
EXTUTILSDIR = $(LIBDIR)\ExtUtils
#
INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
INST_LIB = $(INST_TOP)$(INST_VER)\lib
INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
INST_COREDIR = $(INST_ARCHLIB)\CORE
INST_POD = $(INST_LIB)\pod
INST_HTML = $(INST_TOP)$(INST_VER)\html
#
# Programs to compile, build .lib files and link
#
CC = cl
LINK32 = link
LIB32 = $(LINK32) -lib
RSC = rc
#
# Options
#
INCLUDES = -I$(COREDIR) -I.\include -I. -I..
#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
LOCDEFS = -DPERLDLL -DPERL_CORE
SUBSYS = console
CXX_FLAG = -TP -GX
!IF "$(USE_PERLCRT)" != "define"
LIBC = msvcrt.lib
!ELSE
LIBC = PerlCRT.lib
!ENDIF
PERLEXE_RES =
PERLDLL_RES =
!IF "$(CFG)" == "Debug"
! IF "$(CCTYPE)" == "MSVC20"
OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
! ELSE
OPTIMIZE = -Od -MD -Zi -DDEBUGGING
! ENDIF
LINK_DBG = -debug
!ELSE
OPTIMIZE = -MD -DNDEBUG
LINK_DBG = -release
! IF "$(WIN64)" == "define"
# enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
OPTIMIZE = $(OPTIMIZE) -Ox -GL
LINK_DBG = $(LINK_DBG) -ltcg
! ELSE
# -O1 yields smaller code, which turns out to be faster than -O2 on x86
OPTIMIZE = $(OPTIMIZE) -O1
#OPTIMIZE = $(OPTIMIZE) -O2
! ENDIF
!ENDIF
!IF "$(WIN64)" == "define"
DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
OPTIMIZE = $(OPTIMIZE) -Wp64 -Op
!ENDIF
!IF "$(USE_PERLCRT)" != "define"
BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
!ENDIF
LIBBASEFILES = $(CRYPT_LIB) \
oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
version.lib
# win64 doesn't have some libs
!IF "$(WIN64)" != "define"
LIBBASEFILES = $(LIBBASEFILES) odbc32.lib odbccp32.lib
!ENDIF
# we add LIBC here, since we may be using PerlCRT.dll
LIBFILES = $(LIBBASEFILES) $(LIBC)
CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
$(PCHFLAGS) $(OPTIMIZE)
LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
-libpath:"$(INST_COREDIR)" \
-machine:$(PROCESSOR_ARCHITECTURE)
OBJOUT_FLAG = -Fo
EXEOUT_FLAG = -Fe
CFLAGS_O = $(CFLAGS) $(BUILDOPT)
#################### do not edit below this line #######################
############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
o = .obj
#
# Rules
#
.SUFFIXES : .c $(o) .dll .lib .exe .rc .res
.c$(o):
$(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
.y.c:
$(NOOP)
$(o).dll:
$(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
-out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
.rc.res:
$(RSC) -i.. $<
#
# various targets
# makedef.pl must be updated if this changes, and this should normally
# only change when there is an incompatible revision of the public API.
PERLIMPLIB = ..\perl58.lib
PERLDLL = ..\perl58.dll
MINIPERL = ..\miniperl.exe
MINIDIR = .\mini
PERLEXE = ..\perl.exe
WPERLEXE = ..\wperl.exe
GLOBEXE = ..\perlglob.exe
CONFIGPM = ..\lib\Config.pm
MINIMOD = ..\lib\ExtUtils\Miniperl.pm
X2P = ..\x2p\a2p.exe
# Nominate a target which causes extensions to be re-built
# This used to be $(PERLEXE), but at worst it is the .dll that they depend
# on and really only the interface - i.e. the .def file used to export symbols
# from the .dll
PERLDEP = perldll.def
PL2BAT = bin\pl2bat.pl
GLOBBAT = bin\perlglob.bat
UTILS = \
..\utils\h2ph \
..\utils\splain \
..\utils\dprofpp \
..\utils\perlbug \
..\utils\pl2pm \
..\utils\c2ph \
..\utils\pstruct \
..\utils\h2xs \
..\utils\perldoc \
..\utils\perlcc \
..\utils\perlivp \
..\utils\libnetcfg \
..\utils\enc2xs \
..\utils\piconv \
..\pod\checkpods \
..\pod\pod2html \
..\pod\pod2latex \
..\pod\pod2man \
..\pod\pod2text \
..\pod\pod2usage \
..\pod\podchecker \
..\pod\podselect \
..\x2p\find2perl \
..\x2p\psed \
..\x2p\s2p \
..\lib\ExtUtils\xsubpp \
bin\exetype.pl \
bin\runperl.pl \
bin\pl2bat.pl \
bin\perlglob.pl \
bin\search.pl
MAKE = nmake -nologo
MAKE_BARE = nmake
!IF "$(WIN64)" == "define"
CFGSH_TMPL = config.vc64
CFGH_TMPL = config_H.vc64
!ELSE
CFGSH_TMPL = config.vc
CFGH_TMPL = config_H.vc
!ENDIF
XCOPY = xcopy /f /r /i /d
RCOPY = xcopy /f /r /i /e /d
NOOP = @echo
NULL =
DEL = del
#
# filenames given to xsubpp must have forward slashes (since it puts
# full pathnames in #line strings)
XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
-C++ -prototypes
MICROCORE_SRC = \
..\av.c \
..\deb.c \
..\doio.c \
..\doop.c \
..\dump.c \
..\globals.c \
..\gv.c \
..\hv.c \
..\locale.c \
..\mg.c \
..\numeric.c \
..\op.c \
..\perl.c \
..\perlapi.c \
..\perly.c \
..\pp.c \
..\pp_ctl.c \
..\pp_hot.c \
..\pp_pack.c \
..\pp_sort.c \
..\pp_sys.c \
..\reentr.c \
..\regcomp.c \
..\regexec.c \
..\run.c \
..\scope.c \
..\sv.c \
..\taint.c \
..\toke.c \
..\universal.c \
..\utf8.c \
..\util.c \
..\xsutils.c
EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
!IF "$(PERL_MALLOC)" == "define"
EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
!ENDIF
EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
WIN32_SRC = \
.\win32.c \
.\win32sck.c \
.\win32thread.c
# We need this for miniperl build unless we override canned
# config.h #define building mini\*
#!IF "$(USE_PERLIO)" == "define"
WIN32_SRC = $(WIN32_SRC) .\win32io.c
#!ENDIF
!IF "$(CRYPT_SRC)" != ""
WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
!ENDIF
DLL_SRC = $(DYNALOADER).c
X2P_SRC = \
..\x2p\a2p.c \
..\x2p\hash.c \
..\x2p\str.c \
..\x2p\util.c \
..\x2p\walk.c
CORE_NOCFG_H = \
..\av.h \
..\cop.h \
..\cv.h \
..\dosish.h \
..\embed.h \
..\form.h \
..\gv.h \
..\handy.h \
..\hv.h \
..\iperlsys.h \
..\mg.h \
..\nostdio.h \
..\op.h \
..\opcode.h \
..\perl.h \
..\perlapi.h \
..\perlsdio.h \
..\perlsfio.h \
..\perly.h \
..\pp.h \
..\proto.h \
..\regexp.h \
..\scope.h \
..\sv.h \
..\thread.h \
..\unixish.h \
..\utf8.h \
..\util.h \
..\warnings.h \
..\XSUB.h \
..\EXTERN.h \
..\perlvars.h \
..\intrpvar.h \
..\thrdvar.h \
.\include\dirent.h \
.\include\netdb.h \
.\include\sys\socket.h \
.\win32.h
CORE_H = $(CORE_NOCFG_H) .\config.h
MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
WIN32_OBJ = $(WIN32_SRC:.c=.obj)
MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
$(MINIDIR)\miniperlmain$(o) \
$(MINIDIR)\perlio$(o)
MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
DLL_OBJ = $(DLL_SRC:.c=.obj)
X2P_OBJ = $(X2P_SRC:.c=.obj)
PERLDLL_OBJ = $(CORE_OBJ)
PERLEXE_OBJ = perlmain$(o)
PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
#PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
!IF "$(USE_SETARGV)" != ""
SETARGV_OBJ = setargv$(o)
!ENDIF
DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
SOCKET = $(EXTDIR)\Socket\Socket
FCNTL = $(EXTDIR)\Fcntl\Fcntl
OPCODE = $(EXTDIR)\Opcode\Opcode
SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
IO = $(EXTDIR)\IO\IO
POSIX = $(EXTDIR)\POSIX\POSIX
ATTRS = $(EXTDIR)\attrs\attrs
THREAD = $(EXTDIR)\Thread\Thread
B = $(EXTDIR)\B\B
RE = $(EXTDIR)\re\re
DUMPER = $(EXTDIR)\Data\Dumper\Dumper
ERRNO = $(EXTDIR)\Errno\Errno
PEEK = $(EXTDIR)\Devel\Peek\Peek
BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
DPROF = $(EXTDIR)\Devel\DProf\DProf
GLOB = $(EXTDIR)\File\Glob\Glob
HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
STORABLE = $(EXTDIR)\Storable\Storable
FILTER = $(EXTDIR)\Filter\Util\Call\Call
ENCODE = $(EXTDIR)\Encode\Encode
MD5 = $(EXTDIR)\Digest\MD5\MD5
PERLIOSCALAR = $(EXTDIR)\PerlIO\scalar\scalar
MIMEBASE64 = $(EXTDIR)\MIME\Base64\Base64
TIMEHIRES = $(EXTDIR)\Time\HiRes\HiRes
CWD = $(EXTDIR)\Cwd\Cwd
LISTUTIL = $(EXTDIR)\List\Util\Util
PERLIOVIA = $(EXTDIR)\PerlIO\via\via
XSAPITEST = $(EXTDIR)\XS\APItest\APItest
XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap
UNICODENORMALIZE = $(EXTDIR)\Unicode\Normalize\Normalize
SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
IO_DLL = $(AUTODIR)\IO\IO.dll
POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
B_DLL = $(AUTODIR)\B\B.dll
DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
RE_DLL = $(AUTODIR)\re\re.dll
BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll
FILTER_DLL = $(AUTODIR)\Filter\Util\Call\Call.dll
ENCODE_DLL = $(AUTODIR)\Encode\Encode.dll
MD5_DLL = $(AUTODIR)\Digest\MD5\MD5.dll
PERLIOSCALAR_DLL = $(AUTODIR)\PerlIO\scalar\scalar.dll
MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll
TIMEHIRES_DLL = $(AUTODIR)\Time\HiRes\HiRes.dll
CWD_DLL = $(AUTODIR)\Cwd\Cwd.dll
LISTUTIL_DLL = $(AUTODIR)\List\Util\Util.dll
PERLIOVIA_DLL = $(AUTODIR)\PerlIO\via\via.dll
XSAPITEST_DLL = $(AUTODIR)\XS\APItest\APItest.dll
XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll
UNICODENORMALIZE_DLL = $(AUTODIR)\Unicode\Normalize\Normalize.dll
EXTENSION_C = \
$(SOCKET).c \
$(FCNTL).c \
$(OPCODE).c \
$(SDBM_FILE).c \
$(IO).c \
$(POSIX).c \
$(ATTRS).c \
$(THREAD).c \
$(RE).c \
$(DUMPER).c \
$(PEEK).c \
$(B).c \
$(BYTELOADER).c \
$(DPROF).c \
$(GLOB).c \
$(HOSTNAME).c \
$(STORABLE).c \
$(FILTER).c \
$(ENCODE).c \
$(MD5).c \
$(PERLIOSCALAR).c \
$(MIMEBASE64).c \
$(TIMEHIRES).c \
$(CWD).c \
$(LISTUTIL).c \
$(PERLIOVIA).c \
$(XSAPITEST).c \
$(XSTYPEMAP).c \
$(UNICODENORMALIZE).c
EXTENSION_DLL = \
$(SOCKET_DLL) \
$(FCNTL_DLL) \
$(OPCODE_DLL) \
$(SDBM_FILE_DLL)\
$(IO_DLL) \
$(POSIX_DLL) \
$(ATTRS_DLL) \
$(DUMPER_DLL) \
$(PEEK_DLL) \
$(B_DLL) \
$(RE_DLL) \
$(THREAD_DLL) \
$(BYTELOADER_DLL) \
$(DPROF_DLL) \
$(GLOB_DLL) \
$(HOSTNAME_DLL) \
$(STORABLE_DLL) \
$(FILTER_DLL) \
$(ENCODE_DLL) \
$(MD5_DLL) \
$(PERLIOSCALAR_DLL) \
$(MIMEBASE64_DLL) \
$(TIMEHIRES_DLL) \
$(CWD_DLL) \
$(LISTUTIL_DLL) \
$(PERLIOVIA_DLL) \
$(XSAPITEST_DLL) \
$(XSTYPEMAP_DLL) \
$(UNICODENORMALIZE_DLL)
POD2HTML = $(PODDIR)\pod2html
POD2MAN = $(PODDIR)\pod2man
POD2LATEX = $(PODDIR)\pod2latex
POD2TEXT = $(PODDIR)\pod2text
CFG_VARS = \
"INST_DRV=$(INST_DRV)" \
"INST_TOP=$(INST_TOP)" \
"INST_VER=$(INST_VER)" \
"INST_ARCH=$(INST_ARCH)" \
"archname=$(ARCHNAME)" \
"cc=$(CC)" \
"ld=$(LINK32)" \
"ccflags=-nologo -Gf -W3 $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
"cf_email=$(EMAIL)" \
"d_crypt=$(D_CRYPT)" \
"d_mymalloc=$(PERL_MALLOC)" \
"libs=$(LIBFILES)" \
"incpath=$(CCINCDIR:"=\")" \
"libperl=$(PERLIMPLIB:..\=)" \
"libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
"libc=$(LIBC)" \
"make=$(MAKE_BARE)" \
"use5005threads=$(USE_5005THREADS)" \
"useithreads=$(USE_ITHREADS)" \
"usethreads=$(USE_5005THREADS)" \
"usemultiplicity=$(USE_MULTI)" \
"useperlio=$(USE_PERLIO)" \
"LINK_FLAGS=$(LINK_FLAGS:"=\")" \
"optimize=$(OPTIMIZE:"=\")"
#
# Top targets
#
all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
$(X2P) Extensions
@echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
#------------------------------------------------------------
$(GLOBEXE) : perlglob$(o)
$(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
perlglob$(o) setargv$(o)
perlglob$(o) : perlglob.c
config.w32 : $(CFGSH_TMPL)
copy $(CFGSH_TMPL) config.w32
.\config.h : $(CFGH_TMPL)
-del /f config.h
copy $(CFGH_TMPL) config.h
..\config.sh : config.w32 $(MINIPERL) config_sh.PL
$(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
# this target is for when changes to the main config.sh happen
# edit config.{b,v,g}c and make this target once for each supported
# compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)
regen_config_h:
perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
cd ..
-del /f perl.exe perl*.dll
perl configpm
cd win32
-del /f $(CFGH_TMPL)
-mkdir $(COREDIR)
-perl config_h.PL "INST_VER=$(INST_VER)"
rename config.h $(CFGH_TMPL)
$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
cd ..
miniperl configpm
cd win32
if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
$(XCOPY) ..\*.h $(COREDIR)\*.*
$(XCOPY) *.h $(COREDIR)\*.*
$(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
$(RCOPY) include $(COREDIR)\*.*
-$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
$(LINK32) -subsystem:console -out:$@ @<<
$(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
<<
$(MINIDIR) :
if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
$(MINICORE_OBJ) : $(CORE_NOCFG_H)
$(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
$(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
!IF "$(USE_IMP_SYS)" == "define"
perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
$(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
!ENDIF
# 1. we don't want to rebuild miniperl.exe when config.h changes
# 2. we don't want to rebuild miniperl.exe with non-default config.h
$(MINI_OBJ) : $(CORE_NOCFG_H)
$(WIN32_OBJ) : $(CORE_H)
$(CORE_OBJ) : $(CORE_H)
$(DLL_OBJ) : $(CORE_H)
$(X2P_OBJ) : $(CORE_H)
perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
$(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
CCTYPE=$(CCTYPE) > perldll.def
$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
$(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<
$(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
<<
$(XCOPY) $(PERLIMPLIB) $(COREDIR)
$(MINIMOD) : $(MINIPERL) ..\minimod.pl
cd ..
miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
cd win32
..\x2p\a2p$(o) : ..\x2p\a2p.c
$(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
..\x2p\hash$(o) : ..\x2p\hash.c
$(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
..\x2p\str$(o) : ..\x2p\str.c
$(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
..\x2p\util$(o) : ..\x2p\util.c
$(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
..\x2p\walk$(o) : ..\x2p\walk.c
$(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
$(X2P) : $(MINIPERL) $(X2P_OBJ)
$(MINIPERL) ..\x2p\find2perl.PL
$(MINIPERL) ..\x2p\s2p.PL
$(LINK32) -subsystem:console -out:$@ @<<
$(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
<<
perlmain.c : runperl.c
copy runperl.c perlmain.c
perlmain$(o) : perlmain.c
$(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
$(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
$(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
copy $(PERLEXE) $(WPERLEXE)
$(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
copy splittree.pl ..
$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
if not exist $(AUTODIR) mkdir $(AUTODIR)
cd $(EXTDIR)\$(*B)
..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
cd ..\..\win32
$(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
$(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
cd $(EXTDIR)\$(*B)
$(XSUBPP) dl_win32.xs > $(*B).c
cd ..\..\win32
$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
#----------------------------------------------------------------------------------
Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
$(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
Extensions_clean:
-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
#----------------------------------------------------------------------------------
doc: $(PERLEXE)
$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
--podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
--libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
utils: $(PERLEXE) $(X2P)
cd ..\utils
$(MAKE) PERL=$(MINIPERL)
cd ..\pod
copy ..\README.aix .\perlaix.pod
copy ..\README.amiga .\perlamiga.pod
copy ..\README.apollo .\perlapollo.pod
copy ..\README.beos .\perlbeos.pod
copy ..\README.bs2000 .\perlbs2000.pod
copy ..\README.ce .\perlce.pod
copy ..\README.cygwin .\perlcygwin.pod
copy ..\README.dgux .\perldgux.pod
copy ..\README.dos .\perldos.pod
copy ..\README.epoc .\perlepoc.pod
copy ..\README.freebsd .\perlfreebsd.pod
copy ..\README.hurd .\perlhurd.pod
copy ..\README.hpux .\perlhpux.pod
copy ..\README.irix .\perlirix.pod
copy ..\README.machten .\perlmachten.pod
copy ..\README.macos .\perlmacos.pod
copy ..\README.mint .\perlmint.pod
copy ..\README.mpeix .\perlmpeix.pod
copy ..\README.netware .\perlnetware.pod
copy ..\README.os2 .\perlos2.pod
copy ..\README.os390 .\perlos390.pod
copy ..\README.plan9 .\perlplan9.pod
copy ..\README.qnx .\perlqnx.pod
copy ..\README.solaris .\perlsolaris.pod
copy ..\README.tru64 .\perltru64.pod
copy ..\README.uts .\perluts.pod
copy ..\README.vmesa .\perlvmesa.pod
copy ..\vms\perlvms.pod .\perlvms.pod
copy ..\README.vos .\perlvos.pod
copy ..\README.win32 .\perlwin32.pod
$(MAKE) -f ..\win32\pod.mak converters
cd ..\lib
$(PERLEXE) lib_pm.PL
cd ..\win32
$(PERLEXE) $(PL2BAT) $(UTILS)
distclean: clean
-del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
$(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
-del /f *.def *.map
-del /f $(EXTENSION_DLL)
-del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
-del /f $(EXTDIR)\DynaLoader\dl_win32.xs
-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
-del /f $(LIBDIR)\XSLoader.pm
-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
-del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
-del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
-del /f $(LIBDIR)\File\Glob.pm
-del /f $(LIBDIR)\Storable.pm
-del /f $(LIBDIR)\Filter\Util\Call.pm
-del /f $(LIBDIR)\Digest\MD5.pm
-del /f $(LIBDIR)\PerlIO\scalar.pm
-del /f $(LIBDIR)\PerlIO\via.pm
-del /f $(LIBDIR)\MIME\Base64.pm
-del /f $(LIBDIR)\MIME\QuotedPrint.pm
-del /f $(LIBDIR)\List\Util.pm
-del /f $(LIBDIR)\Scalar\Util.pm
-del /f $(LIBDIR)\Time\HiRes.pm
-del /f $(LIBDIR)\XS\APItest.pm
-del /f $(LIBDIR)\XS\Typemap.pm
-del /f $(LIBDIR)\Unicode\Normalize.pm
-if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
-rmdir /s $(LIBDIR)\IO
-if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
-rmdir /s $(LIBDIR)\B
-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
-rmdir /s $(LIBDIR)\Data
-if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
-if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
-rmdir /s $(LIBDIR)\Digest
-if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
-rmdir /s $(LIBDIR)\MIME
-if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
-rmdir /s $(LIBDIR)\List
-if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
-rmdir /s $(LIBDIR)\Scalar
-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
-rmdir /s $(LIBDIR)\XS
cd $(PODDIR)
-del /f *.html *.bat checkpods \
perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \
perldos.pod perlepoc.pod perlfreebsd.pod perlhurd.pod \
perlhpux.pod perlirix.pod perlmachten.pod \
perlmacos.pod perlmint.pod perlmpeix.pod perlnetware.pod \
perlos2.pod perlos390.pod perlplan9.pod perlqnx.pod \
perlsolaris.pod perltru64.pod perluts.pod \
perlvmesa.pod perlvms.pod perlvos.pod \
perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
podchecker podselect
cd ..\utils
-del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs perldoc perlivp \
dprofpp perlcc libnetcfg enc2xs piconv
-del /f *.bat
cd ..\win32
cd ..\x2p
-del /f find2perl s2p psed
-del /f *.bat
cd ..\win32
-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
-del /f $(CONFIGPM)
-del /f bin\*.bat
cd ..
-del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
cd win32
cd $(EXTDIR)
-del /s *.def Makefile Makefile.old
cd ..\win32
-if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
-rmdir /s $(AUTODIR)
-if exist $(COREDIR) rmdir /s /q $(COREDIR)
-rmdir /s $(COREDIR)
install : all installbare installhtml
installbare : utils
$(PERLEXE) ..\installperl
if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
installhtml : doc
$(RCOPY) html\*.* $(INST_HTML)\*.*
inst_lib : $(CONFIGPM)
copy splittree.pl ..
$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
$(RCOPY) ..\lib $(INST_LIB)\*.*
minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
$(XCOPY) $(MINIPERL) ..\t\perl.exe
$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
attrib -r ..\t\*.*
copy test ..\t
cd ..\t
$(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
cd ..\win32
test-prep : all utils
$(XCOPY) $(PERLEXE) ..\t\$(NULL)
$(XCOPY) $(PERLDLL) ..\t\$(NULL)
$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
test : test-prep
cd ..\t
$(PERLEXE) -I..\lib harness
cd ..\win32
test-notty : test-prep
set PERL_SKIP_TTY_TEST=1
cd ..\t
$(PERLEXE) -I..\lib harness
cd ..\win32
test-wide : test-prep
set HARNESS_PERL_SWITCHES=-C
cd ..\t
$(PERLEXE) -I..\lib harness
cd ..\win32
test-wide-notty : test-prep
set PERL_SKIP_TTY_TEST=1
set HARNESS_PERL_SWITCHES=-C
cd ..\t
$(PERLEXE) -I..\lib harness
cd ..\win32
_test :
$(XCOPY) $(PERLEXE) ..\t\$(NULL)
$(XCOPY) $(PERLDLL) ..\t\$(NULL)
$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
cd ..\t
$(PERLEXE) -I..\lib harness
cd ..\win32
clean : Extensions_clean
-@$(DEL) miniperlmain$(o)
-@$(DEL) $(MINIPERL)
-@$(DEL) perlglob$(o)
-@$(DEL) perlmain$(o)
-@$(DEL) config.w32
-@$(DEL) config.h
-@$(DEL) $(GLOBEXE)
-@$(DEL) $(PERLEXE)
-@$(DEL) $(WPERLEXE)
-@$(DEL) $(PERLDLL)
-@$(DEL) $(CORE_OBJ)
-if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
-rmdir /s $(MINIDIR)
-@$(DEL) $(WIN32_OBJ)
-@$(DEL) $(DLL_OBJ)
-@$(DEL) $(X2P_OBJ)
-@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
-@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
-@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
-@$(DEL) *.ilk
-@$(DEL) *.pdb
# Handy way to run perlbug -ok without having to install and run the
# installed perlbug. We don't re-run the tests here - we trust the user.
# Please *don't* use this unless all tests pass.
# If you want to report test failures, use "nmake nok" instead.
ok: utils
$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
okfile: utils
$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
nok: utils
$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
nokfile: utils
$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok
|
