Installing and Using the JBIG-KIT Package
-----------------------------------------

Markus Kuhn -- 2003-06-11


This text will help you to compile the included demonstration software
and get started with a guided tour to playing around with example
files.

You should be able to use any ANSI/ISO C compiler, such as GNU gcc.

On a Unix system, check Makefile to suit your compiler, then start
"make". If libjbig.a has been produced correctly, then activate the
automatic library test suite with "make test" or just start
libjbig/test_codec. If this test fails, please do let me know.

On other operating systems, just link libjbig/jbig.c and
libjbig/jbig_tables.c together with any application in which you want
to use the JBIG-KIT library.

In subdirectory pbmtools/, you will find the programs pbmtojbg and
jbgtopbm. These are two file converters as examples for applications
which use the JBIG-KIT library. After testing them on some of the
example JBIG files, you can move these executable files together with
the man-pages (if you are in a UNIX style environment) to the
appropriate directories on your system. Options -h and --help will
give you short command line usage summaries of both programs.

The subdirectory examples/ contains a few files as raw JBIG data
streams (these are called bi-level image entities (BIE) in the
standard).

A few examples which you might want to try:

  jbgtopbm ccitt1.jbg ccitt1.pbm

decompresses the CCITT test letter number one into a portable bitmap
file which you can further convert using Jef Poskanzer's PBM tools
<http://www.acme.com/software/pbmplus/> or view with many popular
image processing systems like xv (available for Unix/X11 systems on
<http://www.trilon.com/xv/downloads.html>).

The ccitt1.jbg image is 1728 x 2376 pixels large and can not be easily
displayed on your screen. However fortunately, I have stored it in
progressive mode with the following resolution layers:

  layer 0:  216 x  297 pixel
  layer 1:  432 x  594 pixel
  layer 2:  864 x 1188 pixel
  layer 3: 1728 x 2376 pixel

In progressive mode, each layer has twice the resolution of the
previous one. Resolution layer 0 encodes all is pixels independent
from any other data, all other resolution layers encode only the
difference between the previous and the new resolution layer which
requires much less space than encoding resolution layers without
referring to the lower layer. By default, the BIE files produced by
pbmtojbg start all with a lowest resolution layer 0 which will fit on
a 640 x 480 screen.

In order to tell jbgtopbm that you do not want to decode higher
resolution layers if they will not fit on your e.g. 1024 x 768 pixel
display, then simply use

  jbgtopbm -x 1024 -y 768 ccitt1.jbg ccitt1.pbm

and you will get much faster a 4 times smaller image, the highest
resolution layer that still fits on your screen. You can also directly
pipe the image to another application using standard output by
removing the second file name, e.g.

  jbgtopbm -x 1024 -y 768 ccitt1.jbg | xv -

Now let's do some compression. With

  jbgtopbm ccitt1.jbg ccitt1.pbm

followed by

  pbmtojbg ccitt1.pbm test.jbg

you produce again the same data stream as ccitt1.jbg. However if you
want that the lowest resolution layer is not larger than 70 x 100
pixel (thumb nail image), then use

  pbmtojbg -v -x 100 -y 150 ccitt1.pbm test.jbg

Option -v will tell you that this has caused 5 additional resolution
layers to the lowest 54 x 75 pixel large layer 0. If you have a look at
the lowest resolution layer in test.jbg with

  jbgtopbm -x 100 test.jbg | xv -

you will still be able to clearly recognize the layout and line
structure of the page, which is not the case if less sophisticated
resolution reduction techniques would have been utilized (e.g. as in
xv). With

  pbmtojbg -q ccitt1.pbm test.jbg

you can enforce a single resolution layer which is usually a little
bit more efficient and requires a little bit less space than
progressive encoding.


OK, another small exercise: Assume you want to build a document
database in which you want to store scanned images in two resolution
layers, one for screen previewing and one for laser printer output.
However you do not want that your decision to store images in two
resolutions causes too much additional storage requirement. You decide
that 3 resolution layers in JBIG fit your requirement and you want to
store

  layer 0:  432 x  594 pixels

in the first file test-low.jbg and the two layers

  layer 1:  864 x 1188 pixels
  layer 2: 1728 x 2376 pixels

in the second file test-high.jbg. No problem, just call

  pbmtojbg -d 2 -l 0 -h 0 ccitt1.pbm test-low.jbg
  pbmtojbg -d 2 -l 1 -h 2 ccitt1.pbm test-high.jbg

where -d specifies the total number of layers and -l/-h select the
range of layers written to the output file. You will see that the low
and high resolution file together are only 1.6 kb larger than if you
would have stored only the high-res version directly without
progressive mode (option -q). Progressive mode has here reduced the
additional storage requirement by 50 % compared to storing the 3.2 kb
long low resolution version completely separately from the high
resolution image.

In order to view only the screen version, use

  jbgtopbm test-low.jbg | xv -

and in order to send the full version to the printer, just concatenate
both BIE files like in

  cat test-low.jbg test-high.jbg | jbgtopbm -m | ....


All this functionality and a few tricky things more are available as
functions in the libjbig C library which you can link into your
application. Just copy the relevant files from libjbig/ into your own
source code directory and adapt your Makefile. In libjbig/jbig.doc,
you will find documentation about how to use the library.

Markus